TechniSat DIGITY 1 manual Audio/Video settings, Parental control setting, Time difference GMT hrs

Page 11

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 11

The menu Basic settings will be displayed.

>Use the arrow up/down keys to move the marker within the menu, and to change the individual settings as indicated. When selecting a menu item, please note any relevant information displayed on screen.

The following settings can be made:

5.2.1 Parental control setting:

Your unit can be set to resist unauthorised use by children. Any programmes that you have blocked in terms of the procedure in Points 7.2 or 7.3 can then only be viewed after entering a four-digit PIN number. When this line is marked, use the OK key to switch the parental control setting on or. off.

5.2.2 Time difference GMT (hrs.)

Your unit is equipped with a clock. This is synchronised, by means of satellite reception, with Greenwich Mean Time. Thus all you have to do is to correct the time in accordance with your local time by means of the OK key. For germany, this means +1 hour, and +2 hours during Daylight Savings time (summer).

5.2.3 Country

This function provides for automatic switching between summer and winter time, by country. Go to the line Country/State and use the arrow left/right keys to select your home country.

As this information is currently not broadcast by all programme providers, we advise that you presently leave the setting at None.

>Press the Back key to return to the menu Settings or press the Menu key to return to normal operation. The settings are automatically stored in memory.

5.3 Audio/Video settings

In order to optimize the settings of your receiver in relation to the TV set, you can make furt- her adjustments in the menu Audio/Video settings vornehmen.

>Press the Menu key to display the Main Menu.

>Mark the line Settings by pressing the arrow up/down keys.

>Confirm by pressing the OK key.

The sub-menu Settings will be displayed.

11

Image 11
Contents Digity Table of contents BedanlDIGITY 1englisch4.qxd 21.06.02 1341 Seite MONO1/MONO2 Remote control unitLED Please read this first Safety notesImportant operating instructions Operational breaksDisposal instructions Connecting the DVB receiver to a satellite installation Connections OSD Language InstallationBasic settings Country Audio/Video settingsParental control setting Time difference GMT hrsSCART-Mode LNB-Setting/Adjustment of external unit/satellite selectionLanguage Audio signal Picture/image format of TV setSwitch DiSEqC on or off Additional settings Setting the switching matrix and the LNB propertiesOperation Switching on and offUsing the Programme up/down keys Using the numeric keysUsing the programme list on screen Selecting a different language Volume controlSwitching between TV and Radio Transponder Information Going back to previous programme viewedDisplaying clock and programme information Additional programme informationElectronic Programme Guide TeletextProgramming via EPG TimerSwitching EPG off Manual Programming/Changing timer settings Important Note Configuring programme listsChanging the basic programming Entering programmes in the programme list Selecting a programme listDeleting programmes Sorting programmes Blocking programme access Parental control featureProgramme Search Cancelling blocking of individual programmesChanging the PIN Satellite Manual Search TransponderAfter the scan Restore default basic programming/ Delete allDelete all programmes Activating default settingTechnical Terms System configurationModulator Intermediate Frequency ifLNB/LNC Low Noise Block converter Modulation at 22 KHzTechnical Data Output analogue LNB Power supplyMemory capacity Audio Parameters Input analogueNumber of active satellite positions TimerRemote control system RC-5 Power supply Power supply switch Power consumptionProblem Possible cause Solution Troubleshooting GuideDear customer Then For programme slot Then 3, then TV/Radio switchingBrief instructions for daily use For programme slot