TechniSat DIGITY 1 manual Technical Terms, System configuration

Page 31

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 31

7.6 System configuration

You can access specific equipment data under this menu item.

>Use the arrow up/down keys to mark this line in the sub-menu Settings..

>Confirm by pressing OK.

>Press the Menu key to return to normal operation.

8 Technical Terms

Antenna cable:

Connecting cable between the modulator of the satellite receiver and the antenna input socket of the TV set; used as an alternative if no SCART socket is available

AV: see SCART

Coaxial cable:

Cable connecting the LNB to the satellite receiver, used to carry the signals received as well as to provide power to the LNB.

Data compression/MPEG1/MPEG2:

In order to transmit the current TV standard (625 lines and an image repeating frequency of 50 Hz), one arrives at a digital data volume of 216 MBit/s. This would require enormous bandwidths not available either with terrestrial nor with satellite broadcast technology. A data compression system is thus employed to reduce the amount of data transmitted. In Europe, MPEG-2 has been defined as the worldwide standard for data compression. MPEG-2 is an expansion of the original MPEG-1 standard.

External unit:

Term used for the complete system installed out of doors, consisting of the parabolic/offest dish antenna as well as one or more LNBs, used to receive signals from one or more satelli- tes.

Deemphasis:

Adjustment of the audio frequency band to the broadcast signal, this is determined by the broadcast parameters of the satellite

DiSEqC:

Digital Satellite Equipment Control: a digital switching signal used to control DiSEqC-compa- tible components of the external unit via the antenna cable.

DVB:

Digital Video Broadcasting: a universal digital broadcast standard used for images, graphics, sound and text, i.e. for data in any form, and in any quality, appropriate to the type of data.

Frequency:

Physical dimension, indicates the waves or oscillations per second, the unit of measurement is Hertz (Hz)

Frequency range: a) Satellite resp. LNB:

11 GHz range from 10,70 GHz to 11,70 GHz, 12 GHz range from 11,70 GHz to 12,75 GHz

b) Receiver: Intermediate frequency or 1.IF 950 to 2150 MHz

 

Unit of frequency

Term

Oscillations p. second

1

Hz

1

Hertz

1

1 kHz

1

Kilohertz

1.000

1

MHz

1

Megahertz

1.000.000

1

GHz

1

Gigahertz

1.000.000.000

31

Image 31
Contents Digity Table of contents BedanlDIGITY 1englisch4.qxd 21.06.02 1341 Seite MONO1/MONO2 Remote control unitLED Please read this first Safety notesDisposal instructions Operational breaksImportant operating instructions Connecting the DVB receiver to a satellite installation Connections Basic settings InstallationOSD Language Country Audio/Video settingsParental control setting Time difference GMT hrsSCART-Mode LNB-Setting/Adjustment of external unit/satellite selectionLanguage Audio signal Picture/image format of TV setSwitch DiSEqC on or off Additional settings Setting the switching matrix and the LNB propertiesOperation Switching on and offUsing the Programme up/down keys Using the numeric keysUsing the programme list on screen Switching between TV and Radio Volume controlSelecting a different language Transponder Information Going back to previous programme viewedDisplaying clock and programme information Additional programme informationElectronic Programme Guide TeletextSwitching EPG off TimerProgramming via EPG Manual Programming/Changing timer settings Changing the basic programming Configuring programme listsImportant Note Entering programmes in the programme list Selecting a programme listDeleting programmes Sorting programmes Blocking programme access Parental control featureChanging the PIN Cancelling blocking of individual programmesProgramme Search Satellite Manual Search TransponderAfter the scan Restore default basic programming/ Delete allDelete all programmes Activating default settingTechnical Terms System configurationModulator Intermediate Frequency ifLNB/LNC Low Noise Block converter Modulation at 22 KHzTechnical Data Output analogue LNB Power supplyMemory capacity Audio Parameters Input analogueNumber of active satellite positions TimerRemote control system RC-5 Power supply Power supply switch Power consumptionProblem Possible cause Solution Troubleshooting GuideDear customer Then For programme slot Then 3, then TV/Radio switchingBrief instructions for daily use For programme slot