TechniSat DIGITY 1 manual Transponder, Manual Search

Page 28

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 28

>Press the red function key again to end the scan. A full scan may take more than 15 minutes.

Please also note any additional information provided on screen.

7.4.2 Transponder

Use this menu point to search for programmes specifically from a particular transponder (see Point 9 Technical Terms. For this, it is necessary to enter the transponder data.

>Use the arrow up/down keys to mark the line Transponder.

>Confirm by pressing OK.

The menu >Search>Transponder will be displayed.

Satellite

In this line, mark the satellite on which the selected transponder is installed.

>Use the arrow up/down keys to mark the line Satellite.

>Press the OK key to display a table of active satellites.

>Use the arrow up/down keys to mark the desired satellite.

>Confirm by pressing OK.

The selected satellite will now be displayed in the line Satellite.

Transponder frequency

>Use the arrow up/down keys to mark the line Transponder frequency.

>In this line, enter the required frequency by means of the numeric keys.

Symbol rate

The symbol rate indicates the volume of data transmitted per second. For instance, this can be 27500 (27500 symbols per second).

>Use the arrow up/down keys to mark the line Symbol rate.

>Use the numeric keys to enter the desired symbol rate.

Polarisation

>Use the arrow up/down keys to mark the line Polarisation.

>In this line, use the OK key to enter the polarisation plane (horizontal or vertical) on which the desired programme is broadcast.

>Use the green function key to select whether you want to search only freely receiva- ble programmes (Search all free) or whether you also want to search encrypted programmes (Search all).

>Confirm by pressing the red function key (“Start search”).

The scan will commence. Please note further information displayed on screen.

>Press the red function key again to end the search.

7.4.4 Manual Search

If you are unable to find a specific programme by means of the search methods described under 7.4.1 and 7.4.2, it may be necessary to enter additional programme-specific PID num- bers for this programme. These numbers can be found either in the Internet, or you may have to contact the programme provider to obtain the information.

28

Image 28
Contents Digity Table of contents BedanlDIGITY 1englisch4.qxd 21.06.02 1341 Seite Remote control unit MONO1/MONO2LED Safety notes Please read this firstDisposal instructions Operational breaksImportant operating instructions Connecting the DVB receiver to a satellite installation Connections Basic settings InstallationOSD Language Audio/Video settings Parental control settingTime difference GMT hrs CountryLNB-Setting/Adjustment of external unit/satellite selection Language Audio signalPicture/image format of TV set SCART-ModeSwitch DiSEqC on or off Setting the switching matrix and the LNB properties Additional settingsSwitching on and off Using the Programme up/down keysUsing the numeric keys OperationUsing the programme list on screen Switching between TV and Radio Volume controlSelecting a different language Going back to previous programme viewed Displaying clock and programme informationAdditional programme information Transponder InformationTeletext Electronic Programme GuideSwitching EPG off TimerProgramming via EPG Manual Programming/Changing timer settings Changing the basic programming Configuring programme listsImportant Note Selecting a programme list Entering programmes in the programme listDeleting programmes Blocking programme access Parental control feature Sorting programmesChanging the PIN Cancelling blocking of individual programmesProgramme Search Satellite Transponder Manual SearchRestore default basic programming/ Delete all After the scanActivating default setting Delete all programmesSystem configuration Technical TermsIntermediate Frequency if LNB/LNC Low Noise Block converterModulation at 22 KHz ModulatorTechnical Data LNB Power supply Memory capacityAudio Parameters Input analogue Output analogueTimer Remote control system RC-5Power supply Power supply switch Power consumption Number of active satellite positionsTroubleshooting Guide Problem Possible cause SolutionDear customer TV/Radio switching Brief instructions for daily useFor programme slot Then For programme slot Then 3, then