bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 22
Channel
In this line you should select the TV channel on which you want to record a programme:
>Mark the appropriate line Channel by means of the arrow keys.
>Press the OK.key.
A programme list will be displayed.
>Use the arrow keys to select the desired programme.
>Confirm by pressing OK.
The selected programme will now be taken over into the timer menu.
Date
>Use the arrow keys to mark the column Date.
>Use the numeric keys to enter the date on which you wish to record a programme.
Start
>Use the arrow key right to mark the column Start.
>Use the numeric keys to enter the starting time for the timer in this line.
Stop
>Repeat the steps as described under “Start” to enter the stopping/ending time.
In order for all events to be considered, there should be a break of at least one minute between the stopping time of one timer setting and the starting time of the next timer setting!
Repeat (optional)
>Use the arrow key right to mark the column Rpt.
>Press the OK key.
A selection window will be shown, with several repeating suggestions.
1x Timer on
T Daily repeat
1xW Repeat once a week
>Select the desired function by means of the arrow up/down keys.
>The setting will be stored by pressing the OK key.
>When you have completed the programming, press the yellow function key in order to store the data in memory.
>Press the TV/Radio key to return to normal operation.
Important Note!!!
Please ensure that the correct current time is displayed in the information window. If this not the time, switch reception to a TV channel such as ZDF, that broadcasts current time, for at least 30 seconds. This will enable your receiver to read the correct time into memory.
7 Changing the basic programming
7.1 Configuring programme lists
This chapter describes how you can change the
The following information provides a better understanding of the process:
To facilitate the finding of programmes, your receiver provides four user programme lists.
22