TechniSat DIGITY 1 manual Using the programme list on screen

Page 16

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 16

For example

 

1

for programme slot 1

1, then 4

for programme slot 14

2, then 3, then 4

for programme slot 234

When entering programme numbers consisting of several digits, you have approx. 3 seconds time after pressing a key to complete the entry.

If you wish to enter a programme number consisting of only one or two digits, you can speed up the selection process by keeping your finger pressed down on the last digit a little longer.

6.2.3Using the programme list (on screen):

> Press the OK key.

A programme list will now be displayed.

When TV mode is selected, only TV programmes will be displayed, and when Radio mode is selected, only radio programmes will be displayed. The currently selected programme is hig- hlighted in yellow.

>Now you can use the arrow up/down keys to mark the desired programme.

>Press the OK key to select the marked programme.

>Use the arrow up/down keys to move the marker up or down in the list one line at a time.

>Use the arrow left/right keys to move backward or forward one page at a time.

6.2.3.1 Selecting programme list:

In order to facilitate the finding of programmes, your receiver provides four programme lists. You can thus, if you like, programme one list only with sports programmes, one with news programmes, etc. (see Point 7.1).

>Press the Ok key.

The active programme list will be displayed.

>You can now use the green function key to open a window with the four programme lists (Video A, Video B, Video C and Video D). The active programme list is highlighted in yellow.

16

Image 16
Contents Digity Table of contents BedanlDIGITY 1englisch4.qxd 21.06.02 1341 Seite Remote control unit MONO1/MONO2LED Safety notes Please read this firstDisposal instructions Operational breaksImportant operating instructions Connecting the DVB receiver to a satellite installation Connections Basic settings InstallationOSD Language Audio/Video settings Parental control settingTime difference GMT hrs CountryLNB-Setting/Adjustment of external unit/satellite selection Language Audio signalPicture/image format of TV set SCART-Mode Switch DiSEqC on or off Setting the switching matrix and the LNB properties Additional settingsSwitching on and off Using the Programme up/down keysUsing the numeric keys OperationUsing the programme list on screen Switching between TV and Radio Volume controlSelecting a different language Going back to previous programme viewed Displaying clock and programme informationAdditional programme information Transponder InformationTeletext Electronic Programme GuideSwitching EPG off TimerProgramming via EPG Manual Programming/Changing timer settings Changing the basic programming Configuring programme listsImportant Note Selecting a programme list Entering programmes in the programme listDeleting programmes Blocking programme access Parental control feature Sorting programmesChanging the PIN Cancelling blocking of individual programmesProgramme Search Satellite Transponder Manual SearchRestore default basic programming/ Delete all After the scanActivating default setting Delete all programmesSystem configuration Technical TermsIntermediate Frequency if LNB/LNC Low Noise Block converterModulation at 22 KHz ModulatorTechnical Data LNB Power supply Memory capacityAudio Parameters Input analogue Output analogueTimer Remote control system RC-5Power supply Power supply switch Power consumption Number of active satellite positionsTroubleshooting Guide Problem Possible cause SolutionDear customer TV/Radio switching Brief instructions for daily useFor programme slot Then For programme slot Then 3, then