TechniSat DIGITY 1 Number of active satellite positions, EPG Data, Timer, OSD Languages, General

Page 35

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 35

Number of active satellite positions:

max.4 (DiSEqC 1.0, SAT POSITION / SAT OPTION)

EPG Data:

EPG preview

Timer:

32 events, up to 1 year ahead

OSD Languages:

German, English

Remote control system:		RC-5
Modulation frequency	36 kHz
Infrared wavelength	950 nm

Power supply:

Power supply switch:

Power consumption:

<11,5 W (in operation, horizontal polarisation / 400 mA LNB current

<9,5 W (in operation, without LNB)

<8,3 W (Standby mode)

Input voltage:

180 V.... 250 V / 47...63 Hz alternate current

General:

Ambient temperature	+15°C...+35°C
Humidity	< 80%
Dimensions(WxDxH):	305 mm x 135 mm x 65 mm
Weight/mass:	0,8 kg

Image 35

Contents Digity Table of contents BedanlDIGITY 1englisch4.qxd 21.06.02 1341 Seite MONO1/MONO2 Remote control unitLED Please read this first Safety notesImportant operating instructions Operational breaksDisposal instructions Connecting the DVB receiver to a satellite installation Connections OSD Language InstallationBasic settings Country Audio/Video settingsParental control setting Time difference GMT hrsSCART-Mode LNB-Setting/Adjustment of external unit/satellite selectionLanguage Audio signal Picture/image format of TV setSwitch DiSEqC on or off Additional settings Setting the switching matrix and the LNB propertiesOperation Switching on and offUsing the Programme up/down keys Using the numeric keysUsing the programme list on screen Selecting a different language Volume controlSwitching between TV and Radio Transponder Information Going back to previous programme viewedDisplaying clock and programme information Additional programme informationElectronic Programme Guide TeletextProgramming via EPG TimerSwitching EPG off Manual Programming/Changing timer settings Important Note Configuring programme listsChanging the basic programming Entering programmes in the programme list Selecting a programme listDeleting programmes Sorting programmes Blocking programme access Parental control featureProgramme Search Cancelling blocking of individual programmesChanging the PIN Satellite Manual Search TransponderAfter the scan Restore default basic programming/ Delete allDelete all programmes Activating default settingTechnical Terms System configurationModulator Intermediate Frequency ifLNB/LNC Low Noise Block converter Modulation at 22 KHzTechnical Data Output analogue LNB Power supplyMemory capacity Audio Parameters Input analogueNumber of active satellite positions TimerRemote control system RC-5 Power supply Power supply switch Power consumptionProblem Possible cause Solution Troubleshooting GuideDear customer Then For programme slot Then 3, then TV/Radio switchingBrief instructions for daily use For programme slot