TechniSat DIGITY 1 manual Switch DiSEqC on or off

Page 13

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 13

type of LNB, then you must adjust the receiver as follows :

>Press the Menu, key in order to display the Main menu.

>Use the arrow up/down keys to mark the line Settings.

>Confirm by pressing OK.

The menu Settings will be displayed.

>Now mark the line LNB Settings by means of the arrow up/down keys.

>Confirm by pressing OK.

The menu LNB Settings will be displayed.

The following adjustments can be made in this sub-menu:

5.4.1 Switch DiSEqC on or off

DiSEqC (Digital Satellite Equipment Control) is a digital control signal used to control and switch DiSEqC-compatible components via the antenna cable.

If your external unit is equipped with DiSEqC components, you must switch on the DiSEqC- control:

13

Image 13

Contents Digity Table of contents BedanlDIGITY 1englisch4.qxd 21.06.02 1341 Seite MONO1/MONO2 Remote control unitLED Please read this first Safety notesDisposal instructions Operational breaksImportant operating instructions Connecting the DVB receiver to a satellite installation Connections Basic settings InstallationOSD Language Parental control setting Audio/Video settingsTime difference GMT hrs CountryLanguage Audio signal LNB-Setting/Adjustment of external unit/satellite selectionPicture/image format of TV set SCART-ModeSwitch DiSEqC on or off Additional settings Setting the switching matrix and the LNB propertiesUsing the Programme up/down keys Switching on and offUsing the numeric keys OperationUsing the programme list on screen Switching between TV and Radio Volume controlSelecting a different language Displaying clock and programme information Going back to previous programme viewedAdditional programme information Transponder InformationElectronic Programme Guide TeletextSwitching EPG off TimerProgramming via EPG Manual Programming/Changing timer settings Changing the basic programming Configuring programme listsImportant Note Entering programmes in the programme list Selecting a programme listDeleting programmes Sorting programmes Blocking programme access Parental control featureChanging the PIN Cancelling blocking of individual programmesProgramme Search Satellite Manual Search TransponderAfter the scan Restore default basic programming/ Delete allDelete all programmes Activating default settingTechnical Terms System configurationLNB/LNC Low Noise Block converter Intermediate Frequency ifModulation at 22 KHz ModulatorTechnical Data Memory capacity LNB Power supplyAudio Parameters Input analogue Output analogueRemote control system RC-5 TimerPower supply Power supply switch Power consumption Number of active satellite positionsProblem Possible cause Solution Troubleshooting GuideDear customer Brief instructions for daily use TV/Radio switchingFor programme slot Then For programme slot Then 3, then