TechniSat DIGITY 1 manual Please read this first, Safety notes

Page 6

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 6

3 Please read this first

NOTE:English speaking customers - the default setting of your receiver is German. You should go directly to chapter 5 to change the setting to English (point 5.1 on page 10)

>Before setting up and connecting your equipment, check whether you have received all items that should have been supplied with the unit.

The following items are supplied as standard:

1 Receiver

1 mains cable

1 remote control unit

1 operating manual

1 guarantee card

2 batteries (1,5V microcells AAA).

>Insert the batteries supplied in the battery compartment of the remote control unit, ensuring polarity as indicated.

>Before connecting the receiver, please read the safety notes as set out in Chapter 3.

>Chapters 4 and 5 describe the connection and adjustment of the receiver to the external unit (dish antenna, LNB, etc.), to the TV set, VCR, etc. These settings and adjustments need only be carried out once, and need only be modified if and when there is a change in your external unit, or when additional equipment is connected.

>Chapter 6 describes all functions required for everyday use, such as programme selection or setting the volume.

>In Chapter 7 you will find information on how to set new programmes, and on how to change the order of programmes in the list.

>The technical terms used in the operating manual are explained in Chapter 8.

>The technical data can be found in Chapter 9.

>A troubleshooting guide, assisting you to identify and overcome faults can be found in

Chapter 10.

Safety notes:

For your own protection, you should read these safety notes carefully before operating your new receiver.

The manufacturer cannot be held responsible for damage occurring through non-observance of the safety precautions described, or through inappropriate or improper handling and ope- ration.

>In order to ensure adequate circulation of air, place the unit on a smooth, even surfa- ce, and do not place any objects on top of the unit, as this contains circulation slits which conduct heat away from the interior of the unit.

>Do not place any burning objects, such as a lit candle, on top of the unit.

>Do not subject the unit to water or extreme humidity, and do not place any liquid-filled containers, such as vases, on top of the unit.

6

Image 6
Contents Digity Table of contents BedanlDIGITY 1englisch4.qxd 21.06.02 1341 Seite Remote control unit MONO1/MONO2LED Safety notes Please read this firstOperational breaks Disposal instructionsImportant operating instructions Connecting the DVB receiver to a satellite installation Connections Installation Basic settingsOSD Language Time difference GMT hrs Audio/Video settingsParental control setting CountryPicture/image format of TV set LNB-Setting/Adjustment of external unit/satellite selectionLanguage Audio signal SCART-ModeSwitch DiSEqC on or off Setting the switching matrix and the LNB properties Additional settingsUsing the numeric keys Switching on and offUsing the Programme up/down keys OperationUsing the programme list on screen Volume control Switching between TV and RadioSelecting a different language Additional programme information Going back to previous programme viewedDisplaying clock and programme information Transponder InformationTeletext Electronic Programme GuideTimer Switching EPG offProgramming via EPG Manual Programming/Changing timer settings Configuring programme lists Changing the basic programmingImportant Note Selecting a programme list Entering programmes in the programme listDeleting programmes Blocking programme access Parental control feature Sorting programmesCancelling blocking of individual programmes Changing the PINProgramme Search Satellite Transponder Manual SearchRestore default basic programming/ Delete all After the scanActivating default setting Delete all programmesSystem configuration Technical TermsModulation at 22 KHz Intermediate Frequency ifLNB/LNC Low Noise Block converter ModulatorTechnical Data Audio Parameters Input analogue LNB Power supplyMemory capacity Output analoguePower supply Power supply switch Power consumption TimerRemote control system RC-5 Number of active satellite positionsTroubleshooting Guide Problem Possible cause SolutionDear customer For programme slot TV/Radio switchingBrief instructions for daily use Then For programme slot Then 3, then