
Chapter 8 Configuration on Various WAN Type
4.Enter Username, Password, Service Name (optional) and Idle Timeout (disabled at default).
5.Click first the “Save” and then on the “Reboot” button to complete the WAN configuration.
If all connections are properly established an Internet request, the Compex WP11A+ will detect and automatically establish the connection with Magix SuperSurf.
Next, activate the Netscape/Microsoft Internet Explorer browser to start surfing the Net.
In addition, you can implement advanced features such as Filtering (“Packet Filtering” on Page 64) to control over your LAN users’ Internet access.
8.5Configuring for BigPond Australia (BPA)
This type of connection is specially customized for BPA Cable Internet subscribers in Australia.
NOTE
For OPTUS subscribers in Australia, you have to select Dynamic IP as your WAN type and configure the Compex WP11A+’s System Name with the DHCP Client ID. Please refer to “Configuring Dynamic IP Connection”.
1.Click on WAN Setup and click on the “Change” to select WAN type as Australia BPA Cable.
Figure 8.5a Australia BPA Cable –WAN Type
51