Chapter 11 Packet Filtering
Chapter 11 Packet Filtering
11.1Filtering
Compex WP11A+ allows Packet Filtering rules to be defined based on three factors, Source IP Address, TCP Port and Time. IP Packet Filtering examines the outgoing packets and decides whether to bypass or to block them. After the Packet Filtering rules have been defined, the users may select to bypass or to block the outgoing packets that do not match the rules.
Select on this radio button
Figure 11.1a Adding Filtering Configuration
For example, assume that a rule has been defined as "TCP Port 23 (used by TELNET) from any IP on any day at any time". If the “sent” radio button is selected, all outgoing packets will be sent except TELNET session. If the discarded radio button is selected, all outgoing packets will be blocked except TELNET session.
Click on Filtering function at the Command window.
64
