
Chapter 9 Configuring Network Address Translation
2.Click on the “Port Forwarding” button to display the NAT Static Port Based Entries GUI.
Figure 9.3b NAT Static Port Based Entries
3. Click on the “Add” button.
Known Server
It supports a
Custom Server
It enables the user to define the TCP/UDP port number for the Virtual Server (of which is not supported by the Known Server)
Figure 9.3c Add in new Port Based Entry
4.Enter the information, for example: Private IP Address:192.168.168.14 Server Type: HTTP
5.Click on the “Add” button to add the address into the Port-based mapping table.
59