Compex Technologies WP11A+ manual Configuring PPP over Ethernet Session PPPoE

Chapter 8 Configuration on Various WAN Type

8.3Configuring PPP over Ethernet Session (PPPoE)

For Broadband service providers such as Pacific Internet Broadband and SingNet Broadband, you have to select the PPPoE WAN configuration. This includes users in Germany who use T-1 connection.

NOTE

Certain ADSL Internet subscriptions require Service Name to be specified in order to establish a PPPoE connection.

8.3.1How to Configure SingNet, PacNet and QALA DSL Broadband

This procedure assumes you have a login account from SingNet, Pacific Internet or QALA DSL broadband service, and also all the necessary hardware installation is in place.

NOTE

If you have opted for self-installation when you register for the broadband service, you should first test out the ADSL modem by logging in from your PC. Make sure it can connect successfully before attempting to run it with the Compex WP11A+

1.Click on the WAN Type option on the Command window. The default Dynamic IP setup page will display.

2.Click on the “Change” button and check the radio button next to the PPP over Ethernet.

3.Click on the “Save” button.

Figure 8.3a PPP Over Ethernet –WAN Type

48