Chapter 5 Configure Compex WP11A Using Web Interface
The physical setup of Per Group Pseudo VLAN is illustrated as shown.
Group 2 | Group 3 |
Group 1
Internet
Switch/Hub
WP11A+
Server
Figure 5.3b Physical Setup for Wireless to Ethernet Bridging
Starting Point
The default mode for Compex WP11A+ is in AP Bridge, therefore no further configuration is required.
1.Activate uConfig program. Click on “OpenWeb” button. You are now in the default web page of Compex WP11A+.
The device is in AP
Bridge Mode.
Figure 5.3c Device in AP Bridge Mode
21
