Chapter 8 Configuration on Various WAN Type
8.2.2How to Configure @HOME Cable Service
Many broadband services require a simple DHCP request for connection. Two such cable services are Optus@Home and Roger@Home.
To configure the @HOME Cable Service,
1.Follow the steps stated in the previous “Configuring for Singapore Cable Vision (SCV) Service” section.
2.Next, click on System Identity at the Command window under the SYSTEM TOOLS menu and enter the required field as shown.
System Name
You can obtain this information from your ISP.
System Contact and Location You may leave it as it is or fill in your ISP contact and location information. They are for your future reference only.
Figure 8.2b System Identity
3.Click on the “Apply” button to set the System Identity.
4.Reboot your device.
5.Now, you can start surfing the Internet. If you want to have advanced configuration on your device, please refer to the “Packet Filtering” section on Page 64 or the “Configuring Network Address Translation” section on Page 57.
47
