Compex Technologies WP11A+ manual Logout, Exit uConfig

Chapter 13 Using SYSTEM TOOLS menu

13.7Logout

With the web browser, logging out has never been easier. Simply click on the “Logout” button and you will exit the web-based environment. The system will prompt you to log in again as shown in Figure 13.7a. If you need access to the Compex WP11A+ Configuration again, please activate uConfig program again, regardless which mode you may have previously worked in.

Figure 13.7a System prompt to log in again

NOTE

Do not use the Logon button, use uConfig program instead, to prevent any conflict in IP Address.

13.8Exit uConfig

Upon completion of the Compex WP11A+ configuration, go to Command window and select Exit uConfig function. This will close the uConfig program. Notice the icon located at the taskbar (bottom of your screen) has vanished! This shows that you have successfully exited from uConfig program.

NOTE

If you need to configure Compex WP11A+ again, it is strongly recommended you activate the uConfig program to access the web-based interface to reduce any complication.

74