Chapter 6 Setting up Wide Area Network using Gateway Mode
6.Next, remove cable from your workstation and insert it into your modem’s Ethernet port.
Either PC or notebook
Cable/ADSL
Modem
Internet
WP11A+
xx
Figure 6.2b Connect Compex WP11A+ to modem
7.Power on your broadband modem and wait for it to complete the initialization process which may take a minute or more.
8.Next, power ON the Compex WP11A+. When either of the 10M or 100M Ethernet LED lights up, this shows that there is a cable connection between the ADSL modem and the Compex WP11A+.
9.Power ON the PC/notebook and the WLAN port LED should light up after entering the Windows environment. This indicates good cable connection between the PC and the Compex WP11A+.
10.Once everything is checked, you can now access to the Internet.
34
