To record a broadcast at the same time on the same day every week, press either but- ton until WEEKLY flashes and the desired day of the week appears.
DATE START STOP CH
WEEKLY | |||
SUN |
|
| EP |
|
| ||
|
| ||
|
|
| |
SELE CT START DATE | |||
SELECT : | KEY | ||
SET | : KEY | ||
END | :PROG | KEY | |
To record a broadcast at the same time Monday through Friday, press either button until DAILY flashes and
DATE START STOP CH
DAILY | ||||
|
|
| EP | |
|
| |||
SELE CT START DATE | ||||
SELECT : | KEY | |||
SET | : | KEY |
|
|
END | :PROG | KEY | ||
To record a broadcast at a set time today, press either button until today’s date flashes and TODAY appears.
DATE START STOP CH
8 SAT --:-- --:-- --
TODA | Y |
|
| EP |
|
|
|
| |
|
|
| ||
SELE CT START DATE | ||||
SELECT : | KEY | |||
SET | : | KEY | ||
END | : PROG KEY | |||
To record a broadcast at a specific time and date, repeatedly press PLAY or STOP to select the specific date.
Press FF to store your selection.
10.Repeatedly press or hold down PLAY or STOP to select the start hour. When the correct hour appears, press FF. Then repeatedly press PLAY or STOP to select the minute and press FF.
11.Repeat Step 9 to set the stop time.
12.Repeatedly press or hold down PLAY or STOP to select the channel. Then press FF.
To record from a source connected to the
13.Repeatedly press PLAY or STOP to select the tape speed (SP, LP, or EP). Then press
FF.
14.
•If the information is correct, press PROG.
•If an entry is not correct, repeatedly press FF or REW to move the cursor to the incorrect entry, enter the correct information, then press PROG.
The timer settings appear on the TV screen. To enter another setting, repeat- edly press PLAY or STOP to select another timer number and repeat Steps
15.Press PROG again. TURN VCR OFF FOR TIMER RECORDING briefly appears.
16.Press POWER to turn off the VCR. TIMER appears.
Important:
•Be sure that TIMER appears when you turn the VCR off. If it does not appear, check your entries.
•If you load a cassette with its erase- protection tab removed and set the VCR’s timer, the VCR ejects the cassette and
TIMER and 
flash.
•If you set up the VCR to record a cable broadcast through a cable box, be sure to leave the cable box turned on and tuned to the desired station before the broadcast starts.
•You can manually turn on and operate the VCR before the set times, but the VCR starts an automatic timer recording only if the power is off at the set start time.
39