Optimus 114 (16-551), 63 (HI-FI) (16-633) owner manual Vcr

16-551.fm Page 43 Tuesday, July 20, 1999 5:13 PM

PROBLEM	POSSIBLE SOLUTION
Remote control buttons do	Something is blocking the path from the remote control to the
not work when the power is	VCR.
on and a cassette is loaded.
	Bright light is shining on the VCR’s remote control sensor window.
	Block the source of the light, get closer to the VCR, or change the
	VCR’s location.
	The remote control might be set for another device’s operation.
	Press VCR then try again.
	The remote control’s batteries might be weak. Replace the batter-
	ies.
Cannot see broadcast TV	TV/VCR is not set correctly. Repeatedly press TV/VCR until VCR
programs using the VCR’s	appears.
tuner.
	Audio/video connections are incorrect. Check all connections.
Cannot record from the input	Connections are incorrect. Check all connections.
jacks.
	INPUT is not set correctly. Select LINE1 or LINE2.
No stereo sound for a stereo	You have not connected the VCR’s AUDIO OUT jacks to a stereo
recording (Model 63 only).	system or stereo TV. Connect the jacks to a stereo output.
	The audio out setting is not correctly set. Set it to Hi-Fi— see
	“Receiving/Recording Stereo/SAP Broadcasts (Model 63 Only)”
	on Page 33.
	The VCR might not have adjusted the tracking correctly. You
	might need to manually adjust tracking (see “Tracking” on
	Page 26).

43