Monitoring an Automatic Timer Recording
1.Turn on the TV and set it to the same chan- nel as 3 CH. 4 on the back of the VCR.
Note: If you are using a TV/monitor that is connected to the VCR’s
2.Press TV/VCR until VCR appears.
Checking/Changing Timers
1.Turn on the TV and set it to the same chan- nel as 3 CH. 4 on the back of the VCR.
Note: If you are using a TV/monitor that is connected to the VCR’s
2.Turn on the VCR and repeatedly press TV/ VCR until VCR appears.
3.Press PROG. You see the set program menu.
4.Repeatedly press PLAY or STOP to select TIMER PROGRAM, then press FF. The first four timer settings appear.
STOP CH SPD
2 : 00A 08 SP
5.Repeatedly press PLAY or STOP to select the setting you want to change, then press
FF.
6.Follow Steps
7.When you finish, press PROG again, then turn off the VCR.
40
Clearing a Timer
If the timer recording has not yet started:
1.Turn on the TV and set it to the same chan- nel as 3 CH. 4 on the back of the VCR.
Note: If you are using a TV/monitor that is connected to the VCR’s
2.Turn on the VCR and repeatedly press TV/ VCR until VCR appears.
3.Press PROG. You see the set program menu.
4.Repeatedly press PLAY or STOP to select TIMER PROGRAM, then press FF. The first four timer settings appear.
STOP CH SPD
2 : 00A 08 SP
5.Repeatedly press PLAY or STOP to select the setting you want to clear, then press
ADD/DLT.
6.When you finish clearing the timer, press
PROG.
Turn off the VCR if you still have at least one timer setting entered.
If a timer recording is in progress:
1.Press POWER to stop timer recording. TO
CANCEL TIMER REC PUSH POWER THEN STOP KEY appears if you are watching the signal from the VCR.
2.Within 10 seconds, press POWER then press STOP. TIMER disappears.