Panasonic NV-SJ260 Search Functions, Operation, To Cancel the Index Search or to Stop Playback

Search Functions

To Quickly Find the Beginning of

a Desired Programme

(VISSuVHS Index Search

System)

This VCR automatically records special index signals on the tape every time a recording is started. The Index search function makes use of these index signals to let you find the beginning of a desired programme quickly and easily.

Index signals are automatically recorded in the following cases:

≥When you start a recording by pressing the REC button J, REC/OTR button _ or DIRECT TV REC button 6.

≥When a timer recording starts.

≥When you press the REC button J on the remote control during recording.

Conditions for correct operation of the Index search function:

≥The VCR must be in the stop mode or in the playback mode.

≥Each programme recorded on the tape must be at least 5 minutes long.

Preparations

≥Display the VCR picture on the TV.

≥Insert a recorded video cassette.

Operation

1Press the INDEX button K (that corresponds to the

direction from the current tape position in which the desired programme is located on the tape) to start the index search. For example,

if you want to search for the 2nd recorded programme in

forward direction, press the INDEX ; button K twice.

≥The VCR fast-forwards or rewinds the tape and searches for the specified index signal (the beginning of the desired recorded programme).

When it has been found, playback starts automatically.

To Cancel the Index Search or to Stop Playback:

Press the Stop button 9.

Hints:

≥Searching in either direction is possible up to the 20th index signal.

≥If you press either of the INDEX buttons K too many times, simply press the other INDEX button K (indicating the opposite direction) to correct it. In this way, you can reduce the displayed figure down to 1.

≥The figure on the VCR display decreases by 1 every time an index signal is located.

To Search for a Desired Programme While Checking the Recorded Contents on a Cassette (Intro-Jet Scan)

This VCR automatically records special index signals on the tape every time a recording starts. The Intro-Jet Scan function makes use of these index signals to play back the beginning of each programme recorded on the cassette one after another at high speed. This lets you quickly and easily check the contents of a cassette and find a desired programme.

Index signals are automatically recorded in the following cases:

≥When you start a recording by pressing the REC button J, REC/OTR button _ or DIRECT TV REC button 6.

≥When a timer recording starts.

≥When you press the REC button J on the remote control during recording.

Conditions for correct operation of the Intro-Jet Scan function:

≥The cassette must have been ejected after the timer recordings were performed.

≥VCR must be switched on, be in the playback mode or be in the standby mode.

≥Each programme recorded on the tape must be at least 15 minutes long.

Preparations

≥Display the VCR picture on the TV.

≥Insert a recorded video cassette.

Operations

1Press the SEARCH button M to start the Intro-Jet Scan.

≥After rewinding the tape to the beginning, the VCR plays it back at high speed for approximately

10 seconds. It then fast-forwards the tape to the next tape position marked by an index signal (beginning of a programme), and every time an index signal is found, the VCR switches over to high-speed playback (Cue) for about 10 seconds.

	Beginning of tape		Present tape position
Index signal	Programme 1	Programme 2	Programme 3

	Operations
view, press the Play button I to start normal playback.
Rewinding
High-speed Playback Fast-forwarding
(Cue)
2 When you have found the programme that you want to	Advanced
To Cancel the Intro-Jet Scan or to Stop Playback:
Press the Stop button 9.
Note:
≥ If you press the SEARCH button M after a timer recording
has finished, but before ejecting that cassette, the
Programme List Search (for details, see page 20) will be
activated instead of the Intro-Jet Scan.

21