Panasonic NV-SJ260 operating instructions Hints

Page 8

Connecting and Preparations for a TV Equipped with the Q Link Function

Connections and preparations for a TV equipped with the “Q Link”°1 function and equipped with a 21-pin Scart socket. For the connections and preparations for a TV equipped with the “DATA LOGIC”°2, “Easy Link”°3, “Megalogic”°4 or “SMARTLINK”°5 function and with a 21-pin Scart socket, also read from this page.

For details about the connections, also read TV’s operating instructions.

Be sure to keep both the TV and VCR switched off until all connections have been made. For your safety, be sure not to connect or handle the equipment with wet hands.

AC Input socket `

AC mains lead (supplied)

Aerial (not supplied)

	c
a			Aerial lead
a			Aerial lead
			(not supplied)

Aerial Input socket

d

RF coaxial cable (supplied)

Fully-wired 21-pin Scart cable (not supplied)

TV with Q Link function (not supplied)

21-pin Scart socket

To AC mains socket

Hints:

≥Q Link is an advanced system that offers a range of convenient functions such as automatic copying of the tuning position of all available TV stations (in the same order as they are programmed on the TV) into your VCR’s memory (this is called Download) if you connect the VCR to your TV with a fully-wired 21-pin Scart cable (not supplied). Depending on the manufacturer, the equivalent of the Q Link function has a different name and may not work exactly the same.

°1 “Q Link” is a registered trademark of Panasonic. °2 “DATA LOGIC” is a registered trademark of Metz. °3 “Easy Link” is a registered trademark of Philips. °4 “Megalogic” is a registered trademark of Grundig. °5 “SMARTLINK” is a registered trademark of Sony.

For details, refer to your TV’s operating instructions or consult your dealer.

≥Unlike in most commercially sold 21-pin Scart cables, in fully-wired 21-pin Scart cables all 21 pins of one plug are connected to the matching pin of the plug on the other end of the cable. This type of cable is necessary for the Preset Download function to work.

8

Image 8

Contents NV-SJ260 Series Contents Dear CustomerControls and Components VCRPreparing the Remote Control Inserting Remote Control BatteriesIf the Sliding Cover of the Remote Control Becomes Detached VCR Operation Do not Remove Outer Cover RemarksSetting the Remote Control to Operate Your TV TV OperationList of TVs Compatible With the VCR’s Remote Control Manufacturer CodeHints Preset Download Function To Simultaneously Set Up this VCR with a New TVTo Set Up this VCR with a TV Already UsePage Auto Setup Function Tuned Correctly by the Auto SetupTo Confirm that the TV Stations Have Been FunctionDisplay Playback Convenient Automatic Functions To Stop Playback Automatically Playback Off Timer FunctionTo Eject the Video Cassette Using the Remote Controller To Display the Approximate Remaining Tape Time RecordingTo Pause Recording Linked Timer Recordings with a Digital Receiver To Prevent Accidental Erasure of Recorded ContentsTimer Recording To Suspend the Timer Recording Standby ModePress the OK button S to conclude the settings To Programme with the On Screen Display OSDPress the OK button S to display the programmed content Press the OK button S again to conclude SettingsTo Programme with ShowView Function Press the Numeric buttons 2 to enter the ShowView numberOther Timer Recordings and Convenient Functions Setting the Recording Date/DaysTo Check the Contents of Timer Recording Programmings To Change a Timer Recording ProgrammingTo Cancel the Programming of a Timer Recording To Check the Total Timer Recording Programming TimeTo Cancel the Programme List Search PreparationTo Cancel the Index Search or to Stop Playback To Cancel the Intro-Jet Scan or to Stop PlaybackSearch Functions OperationConnecting the VCR to a Decoder EditingAssemble Editing To Connect the VCR to a DecoderSatellite receiver not supplied Pin Scart socket To Enter or Change the Name of a TV Station To Obtain the Best Tuning Condition To Enter Newly Available TV StationsList of TV Reception Channels To Change the Channel Number of an Already Tuned TV StationTo Preset Pay TV Stations To Change the Type of Video System Colour TV systemTo Return the VCR to the Shipping Condition To Restart the Auto SetupTo Restart the Download To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock Other Convenient Functions Various Settings Settings for the Main Menu Item DisplayVideo system colour TV system Tape length indicator TV station nameSettings for the Main Menu Item Functions DimmedTo Set the Remote Control Mode Language SettingCountry Setting Glossary VPS Video Programme System/ PDC Programme Delivery ControlCrystal View Control CVC Programming ShowView Changes Non MethodLink Function Pin Scart SocketMessage Message appears when AV1 Scart Socket for Q Link connectionBefore Requesting Service √ On Screen Display Messages√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ The Remote Control Does Not Work Correctly √ Recording Is Not Possible or Does Not Work ProperlyAdjusting the Playback Picture If the Still Picture Scrolls Up or Down V-Lock AdjustmentPrecautions To Return to Auto TrackingAvoid sudden changes in temperature Keep the VCR away from high temperaturesCleaning the VCR Avoid humidity and dustSpecifications