Panasonic NV-SJ260 operating instructions Do not Remove Outer Cover, Remarks

Page 5

Warning and Important Information

As this equipment gets hot during use, operate it in a well ventilated place; do not install this equipment in a confined space such as a book case or similar unit.

IMPORTANT

Your attention is drawn to the fact that the recording of pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws.

WARNING

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

FOR YOUR SAFETY

ªDO NOT REMOVE OUTER COVER.

To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel.

Remarks

1.This VCR is also capable of receiving SECAM type broadcasting programmes (SECAM B/G) and recording/ playing back its colour television signals.

2.When a cassette which has been recorded on this VCR is played back on a SECAM VCR, the picture may be reproduced in black and white. When it is played back on a PAL VCR without SECAM capability, the picture may not be reproduced in normal colour.

3.When cassettes recorded on a SECAM VCR or SECAM pre-recorded cassettes are played back on this VCR, the picture may be reproduced in black and white.

4.This VCR is not designed for use in France, where a SECAM VCR should be used instead.

Press the VCR-ON/OFF button 1 to switch the VCR from on to standby mode or vice versa. In the standby mode, the VCR is still connected to the mains.

SHOWVIEW is a trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Before Use

5

Image 5
Contents NV-SJ260 Series Dear Customer ContentsVCR Controls and ComponentsInserting Remote Control Batteries Preparing the Remote ControlIf the Sliding Cover of the Remote Control Becomes Detached VCR OperationRemarks Do not Remove Outer CoverTV Operation Setting the Remote Control to Operate Your TVManufacturer Code List of TVs Compatible With the VCR’s Remote ControlHints To Simultaneously Set Up this VCR with a New TV Preset Download FunctionTo Set Up this VCR with a TV Already UsePage Tuned Correctly by the Auto Setup Auto Setup FunctionTo Confirm that the TV Stations Have Been FunctionDisplay Playback Convenient Automatic Functions To Stop Playback Automatically Playback Off Timer FunctionTo Eject the Video Cassette Using the Remote Controller To Display the Approximate Remaining Tape Time RecordingTo Pause Recording To Prevent Accidental Erasure of Recorded Contents Linked Timer Recordings with a Digital ReceiverTo Suspend the Timer Recording Standby Mode Timer RecordingPress the OK button S to conclude the settings To Programme with the On Screen Display OSDPress the OK button S again to conclude Settings Press the OK button S to display the programmed contentTo Programme with ShowView Function Press the Numeric buttons 2 to enter the ShowView numberSetting the Recording Date/Days Other Timer Recordings and Convenient FunctionsTo Check the Contents of Timer Recording Programmings To Change a Timer Recording ProgrammingTo Check the Total Timer Recording Programming Time To Cancel the Programming of a Timer RecordingTo Cancel the Programme List Search PreparationTo Cancel the Intro-Jet Scan or to Stop Playback To Cancel the Index Search or to Stop PlaybackSearch Functions OperationEditing Connecting the VCR to a DecoderAssemble Editing To Connect the VCR to a DecoderSatellite receiver not supplied Pin Scart socket To Enter or Change the Name of a TV Station To Enter Newly Available TV Stations To Obtain the Best Tuning ConditionList of TV Reception Channels To Change the Channel Number of an Already Tuned TV StationTo Change the Type of Video System Colour TV system To Preset Pay TV StationsTo Return the VCR to the Shipping Condition To Restart the Auto SetupTo Restart the Download To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock Settings for the Main Menu Item Display Other Convenient Functions Various SettingsVideo system colour TV system Tape length indicator TV station nameDimmed Settings for the Main Menu Item FunctionsTo Set the Remote Control Mode Language SettingCountry Setting VPS Video Programme System/ PDC Programme Delivery Control GlossaryCrystal View Control CVC Programming ShowView Changes Non MethodPin Scart Socket Link FunctionMessage Message appears when AV1 Scart Socket for Q Link connection√ On Screen Display Messages Before Requesting Service√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ Recording Is Not Possible or Does Not Work Properly √ The Remote Control Does Not Work CorrectlyIf the Still Picture Scrolls Up or Down V-Lock Adjustment Adjusting the Playback PicturePrecautions To Return to Auto TrackingKeep the VCR away from high temperatures Avoid sudden changes in temperatureCleaning the VCR Avoid humidity and dustSpecifications