Panasonic NV-SJ260 operating instructions Satellite receiver not supplied Pin Scart socket

Page 23

Connecting the VCR to a Satellite Receiver or Digital Receiver

Satellite receiver here includes a digital receiver.

The connection method differs depending on the type of your satellite receiver.

For details about the connection, also read the satellite receiver’s operating instructions.

If the Satellite Receiver is Equipped with a 21-pin Scart Socket

If your satellite receiver is equipped with a 21-pin Scart socket, use a 21-pin Scart cable to connect the VCR.

For the connection to the TV, refer to pages 8 and 10.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

b

Satellite receiver (not supplied)

 

 

1

2

21-pin Scart socket

 

To an AC Mains socket

21-pin Scart cable

¡If your satellite

 

 

(not supplied)

 

receiver has a VCR

 

 

 

socket, connect the

 

 

cable to it.

 

1Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket b on the VCR and to the 21-pin Scart socket on the satellite receiver.

2Connect the satellite receiver’s mains lead to an AC mains socket.

3Set “AV2” to “TIMER” or “EXT”. For details, see page 30.

If the Satellite Receiver Is Not Equipped with a 21-Pin Scart Socket

In case your satellite receiver is not equipped with a 21-pin Scart socket, use the RF coaxial cable to connect it to the VCR.

For the connection to the TV, refer to pages 8 and 10.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

 

Aerial (not supplied)

Satellite receiver

Aerial Input socket

(not supplied)

Aerial lead

 

(not supplied)

 

1

3

Aerial Output

socket

To an AC mains socket

2

cRF coaxial cable (not supplied)

1Connect the aerial lead to the Aerial Input socket on the satellite receiver.

2Connect the RF coaxial cable to the Aerial Output socket on the satellite receiver and to the Aerial Input socket c on the VCR.

3Connect the satellite receiver’s mains lead to an AC mains socket.

Hint:

¡ The RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR,

e.g. re-adjust to channel 33. OperationsAdvanced

23

Image 23
Contents NV-SJ260 Series Dear Customer ContentsVCR Controls and ComponentsVCR Operation Preparing the Remote ControlInserting Remote Control Batteries If the Sliding Cover of the Remote Control Becomes DetachedRemarks Do not Remove Outer CoverTV Operation Setting the Remote Control to Operate Your TVManufacturer Code List of TVs Compatible With the VCR’s Remote ControlHints Use Preset Download FunctionTo Simultaneously Set Up this VCR with a New TV To Set Up this VCR with a TV AlreadyPage Function Auto Setup FunctionTuned Correctly by the Auto Setup To Confirm that the TV Stations Have BeenDisplay Playback Convenient Automatic Functions To Stop Playback Automatically Playback Off Timer FunctionTo Eject the Video Cassette Using the Remote Controller To Display the Approximate Remaining Tape Time RecordingTo Pause Recording To Prevent Accidental Erasure of Recorded Contents Linked Timer Recordings with a Digital ReceiverTo Programme with the On Screen Display OSD Timer RecordingTo Suspend the Timer Recording Standby Mode Press the OK button S to conclude the settingsPress the Numeric buttons 2 to enter the ShowView number Press the OK button S to display the programmed contentPress the OK button S again to conclude Settings To Programme with ShowView FunctionTo Change a Timer Recording Programming Other Timer Recordings and Convenient FunctionsSetting the Recording Date/Days To Check the Contents of Timer Recording ProgrammingsPreparation To Cancel the Programming of a Timer RecordingTo Check the Total Timer Recording Programming Time To Cancel the Programme List SearchOperation To Cancel the Index Search or to Stop PlaybackTo Cancel the Intro-Jet Scan or to Stop Playback Search FunctionsTo Connect the VCR to a Decoder Connecting the VCR to a DecoderEditing Assemble EditingSatellite receiver not supplied Pin Scart socket To Enter or Change the Name of a TV Station To Change the Channel Number of an Already Tuned TV Station To Obtain the Best Tuning ConditionTo Enter Newly Available TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system To Preset Pay TV StationsTo Return the VCR to the Shipping Condition To Restart the Auto SetupTo Restart the Download To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock TV station name Other Convenient Functions Various SettingsSettings for the Main Menu Item Display Video system colour TV system Tape length indicatorDimmed Settings for the Main Menu Item FunctionsTo Set the Remote Control Mode Language SettingCountry Setting Programming ShowView Changes Non Method GlossaryVPS Video Programme System/ PDC Programme Delivery Control Crystal View Control CVCAV1 Scart Socket for Q Link connection Link FunctionPin Scart Socket Message Message appears when√ Playback Does Not Work Properly Before Requesting Service√ On Screen Display Messages √ The VCR Does Not Work Correctly√ Recording Is Not Possible or Does Not Work Properly √ The Remote Control Does Not Work CorrectlyTo Return to Auto Tracking Adjusting the Playback PictureIf the Still Picture Scrolls Up or Down V-Lock Adjustment PrecautionsAvoid humidity and dust Avoid sudden changes in temperatureKeep the VCR away from high temperatures Cleaning the VCRSpecifications