Preset Download Function, Use, Hint | Panasonic NV-SJ260 guide

VCR display

Preset Download Function

The Preset Download function automatically copies the tuning position of all available TV stations into the VCR’s memory when you connect the VCR using a fully-wired 21-pin Scart cable to a TV equipped with the Q Link function.

To Simultaneously Set Up this VCR with a New TV

Perform the following operation steps exactly as described to ensure that the Preset Download function works correctly.

√First of all, make sure that the VCR is switched off.

1Switch the TV on.

The TV starts to tune all available TV stations and to adjust the clock.

(This is called Auto Setup function.)

Hints:
≥ If you use a Panasonic TV and perform the operation
step 1, starting the downloading of the setup data will
automatically display the “Download” indication. However,
in case of a TV of another make, the “Download” indication
may not appear. In this case, select the AV input on your
TV if you want to see the “Download” indication.
≥ If you select “Schweiz”, “Suisse” or “Svizzera” on the
Country setting menu, the Display setting menu appears
automatically to let you set the item “Power save” to “ON”.
In this setting, the VCR’s power consumption is minimised
when it is off (Standby mode).To turn the VCR on, keep the
VCR-ON/OFF button 1 pressed on the VCR main unit. It is	Up
not possible to turn it on with the remote control.

To Set Up this VCR with a TV Already in	Setting
Use	Setting

√ When the TV has finished its

own auto setup, the VCR is

automatically switched on, and

the downloading of the setup

data from the TV to the VCR

starts. (Applicable to TVs with

“Q Link” or “DATA LOGIC”

function)

If your TV is equipped with the

“Easy Link”, “Megalogic” or

“SMARTLINK” function, the

Country setting menu appears

on the TV screen before

On Screen Display

Download

Download in

progress,

please wait.

Position 67

Indication during downloading

Country

België	Deutschland
Belgique	Österreich
Belgien	Portugal
Danmark	Suomi

1	Switch the TV on.			and
2	Select the AV input on your TV.

3	Set the VCR/TV switch O to “VCR”.			Connecting
4	Press the VCR-ON/OFF button

			Download
	1 to switch the VCR on.		Download
	1 to switch the VCR on.		Download in
	Downloading of the setup data		progress,
	Downloading of the setup data		please wait.
	starts automatically. (Applicable		please wait.
	starts automatically. (Applicable		Position 67
	to TVs with “Q Link” or
	to TVs with “Q Link” or
	“DATA LOGIC” function)	Indication during downloading
		Indication during downloading

downloading. Press the Cursor

buttons (3421) Q to select

the desired country. Then,

press the OK button S and the

downloading automatically

starts.

España	Sverige
France	Schweiz
Italia	Suisse
Nederland	Svizzera
Norge	others

Menu for Country setting

If your TV is equipped with the “Easy Link”, “Megalogic”or “SMARTLINK” function, the Country setting menu appears on the TV screen before downloading. Press the Cursor buttons (3421) Q to select

Country

België	Deutschland
Belgique	Österreich
Belgien	Portugal
Danmark	Suomi
España	Sverige
France	Schweiz
Italia	Suisse

√ The VCR’s Auto Setup (Downloading) is complete when the programme position and the current time appear in the VCR display.

CVC

the desired country. Then, press the OK button S and the downloading automatically starts.

Nederland	Svizzera
Norge	others

Menu for Country setting

Programme	Indication when the
position	current time is 16:45

Note:

≥If you accidentally switch on the VCR before the TV, downloading of the setup data from the TV may not be performed correctly. In this case, follow the operation steps below.

1Wait until the Auto Setup is complete on both the TV and the VCR.

2Press the MENU button T to display the OSD Main menu on the TV screen.

3Press the Cursor buttons (3421) Q to select “Tuning” and then “Download”.

4Press the OK button S twice. Downloading of the setup data from the TV to the VCR starts.

5When the programme position and the current time appear in the VCR display, downloading is complete.

√ When the programme position	CVC
and the current time appear in	CVC
and the current time appear in
the VCR display, the VCR’s
Auto Setup (Downloading) is
complete.	Programme	Indication when the
	position	current time is 16:45

Hint:

≥If you select “Schweiz”, “Suisse” or “Svizzera” on the Country setting menu, the Display setting menu appears automatically to let you set the item “Power save” to “ON”. In this setting, the VCR’s power consumption is minimised when it is off (Standby mode).To turn the VCR on, keep the VCR-ON/OFF button 1 pressed on the VCR main unit. It is not possible to turn it on with the remote control.