VCR Operation
When you want to operate the VCR, set the VCR/TV switch
Oto “VCR”.
°2 Numeric buttons
To select the programme positions
Example: 9: 9
19:
1 
9
To enter a ShowView number.
To enter numbers for various settings.
≥ It is not possible to select the satellite programme |
position even if you press the Numeric button “SAT 0” |
Preparing the Remote Control
Inserting Remote Control
Batteries
1 | 1 Slide off the battery cover. |
2
2Insert the batteries with the polarity (+ and
-aligned.
+
+
2 on this VCR. |
°= Tape Counter Reset button
To reset the tape counter (elapsed time) to “0:00.00”.
≥The tape counter is automatically reset to “0:00.00” when a video cassette is inserted.
°? AUDIO button
This button does not operate on this VCR.
°@ STILL ALBUM button
This button does not operate on this VCR.
3
-
3 Replace the battery cover.
°A VCR 1/2 switch
Set to the “VCR 2” position when using two Panasonic VCRs. (See page 31.)
°E SP/LP button
This button does not operate on this VCR.
°P
°U Child Lock Function buttons
(Convenient function to prevent unauthorized use)
This function deactivates all buttons on the VCR and the remote control. Use this function, when you do not want other people to operate the VCR.
To Activate the Child Lock Function:
1Hold down the OK and the OFF (i) buttons U simultaneously until the “!" hold” indication appears in the VCR display.
≥If you press a button while the Child Lock function is on, the “!" hold” indication appears in the VCR display to inform you that no operation is possible.
To Cancel the Child Lock Function:
1Hold down the OK and the OFF (i) buttons U simultaneously until the “!" hold” indication disappears.
≥If you disconnect the power cable, the Child Lock function is automatically cancelled after the power backup time of approximately 60 minutes has elapsed.
≥If you cannot cancel the Child Lock function, press the EXIT button R and perform the operation step 1.
°[ Cassette compartment
°\
4 °^ VCR display
Notes for Battery Replacement:
≥The service life of the batteries is approximately 1 year. However, it varies considerably depending on the frequency of use.
≥When they are exhausted, replace them with two AA, UM3, or R6 size batteries.
≥When the batteries are exhausted, remove them immediately and dispose of them correctly.
≥Make sure that the batteries are inserted with the polarity (+ and
≥Do not mix old battery with new battery.
≥Do not mix different battery types, i.e. Alkaline and Manganese.
≥Do not use rechargeable
≥Do not heat or
≥When you do not use the remote control for a long time, take out the batteries and store them in a cool, dry place.
If the Sliding Cover of the Remote Control Becomes Detached
If the sliding cover of the remote control becomes detached accidentally, fit it securely in place by placing it on the top of the remote control at the position shown in the illustration below, and pushing it down until it clicks into position.
≥It is not possible to fit the sliding cover in place by pushing or sliding it on from the bottom end of the remote control.
CorrectWrong