Panasonic AJ- HD3700B manual Manual editing

Page 35

Manual editing

Manual editing is a method used for editing which does not involve the REGISTRATION of edit points (IN/OUT points).

1.Check the connections.

2.Switch on the power.

3.Insert the cassette to be edited.

4.Press the F13 (REC INH) key on the HOME menu to set to FREE or NRML.REC.

REC INH

FREE

5.Select and adjust the input signals.

6.To record the time code, perform the time code-related settings on the TC/CHR menu.

7.To enter the desired default value for the time code, press the cursor center key at the HOME menu and set the desired value.

8.Press the ASSEMBLE or the INSERT button to display the INSERT/ASSEMBLE EDIT menu.

9.Press the F12 key on the INSERT (or the ASSEMBLE) EDIT menu to set to MANUAL EDIT, display the MANUAL EDIT menu, and highlight the F9 (INSERT or ASSEMBLE) key.

MANUAL

EDIT

10.When insert editing was selected in step 8 by pressing the INSERT button, press the F13 key on the INSERT MANUAL EDIT menu to display the INSERT MANUAL EDIT CH SELECT menu, and select the channels to be edited.

11.Set the editing timing with the F1 (TIMING) key on the INSERT (or ASSEMBLE) MANUAL EDIT SET UP menu.

TIMING

F2

How to display the ≥HOME menu:

≥TC/CHR menu:

≥INSERT (or ASSEMBLE) EDIT menu:

menus:

(or

)#

HOME

TC/CHR

INSERT

ASSEM

F12

≥INSERT (or ASSEMBLE)

≥INSERT (or ASSEMBLE)

MANUAL EDIT CH SELECT menu:

MANUAL EDIT SET UP menu:

(or

)#

#

(or

)#

INSERT

ASSEM

F12

F13

INSERT

ASSEM

F12

#

F8

– 35 –

Image 35

Contents Operating Instructions Hardware Operating precaution For your safety GeneralIs the safety information FCC Note For your safetyFor Your Safety Please Read the Following Text Carefully For your safety EuropeContents Picture/sound quality at a reasonable price FeaturesSlow motion, search and editing functions Specifications and interfacesOperation and maintenance Audio Monitor Controls and their functionsCursor 1415 16UNITY/VAR ≥ENT≥BS ≥FROM ≥COPYVideo Video OUT Audio Audio OUT 32 TC/CHR SET UP Test Diag28 29 Entry button Shtl button JOG button VAR button Search dialButton After editing 44454647484950 Fuse Power supply partDigital signal input/output section Connectors BNCt41513141617 Analog input/output sectionCUE OUT Parallel Remote control sectionRemote Connection for a single unit ConnectionsConnection for 2 units Connection with an editing controller ONoteN Tapes≥Confirm that the REC Inhibit lamp has gone out Preparation ∑ Release the recording inhibit mode∑ Selecting the input signals and adjusting their levels RecordingOperation Preparation ∑ Setting the time code∑ Audio monitoring ∑ Checking the input signalsSimultaneous playback monitoring ∑ Video monitoring How to display the ≥SYSTEM SET UP menu Menus Home Audio TC/CHR Recording Press the Play button ∑ Monitoring the audio signals∑ Adjusting the audio level Playback∑ Stop Basic operations∑ Jog ∑ Shuttle Shtl∑ Variable VAR ≥Preset variable mode∑ Cue When TC Input is set to the Standard mode∑ Tape speed override TSO function Cue-up operation When TC Input is set to the Reverse modeCeding the cue point by the preroll time Press the F key and Preroll button together. This resultsPress the ENT key ≥Cue points cannot be cleared ∑ Correction of the cue pointMove the cursor to the place which is to be corrected Enter the new value with the number keysManual editing Manual editing Manual audio cross editing Mode FadeAutomatic insert/assemble editing ONoteN ONotesN Audio split editingOUT point preview Set the F4 VAR Memo key to on Variable memory FunctionSet the F3 W/PLYR key to OFF Plyr Connector signals Pin no Signal Direction Type Description ∑ Parallel I/O 50P connector≥50P error status output table FF Status Output Activel Signal Pin No ∑ Storage Video head cleaning∑ Maintenance ∑ OperationRack-mounting How to eject the tape in an emergency TroubleshootingServo microcomputer DIP switch specifications DIP switchAV microcomputer DIP switch specifications Syscon microcomputer DIP switch specificationsGeneral SpecificationsVideo system Input connectorsOutput connectors Video adjustment rangesCue track Audio input connectorsAudio output connectors AudioOptional accessory Audio adjustment rangesOther input/output signals Accessory suppliedPage Panasonic Broadcast Europe