Panasonic AJ- HD3700B manual Rack-mounting

Page 50

Rack-mounting

The VTR can be installed in a 19-inch standard rack using the AJ-MA37P rack-mounting adapters (optional accessory).

It is recommended that the slide rail (CC3001-99-0191) made by Chassis Trak be used as the installed rails. For further details, consult your dealer.

1.Attach the inner members on each side of the VTR using the four screws supplied with the slide rails .

The length of the screws used is limited.

If the mounting screws have been lost or misplaced, use screws with a maximum length of 2/5˝.

Be absolutely sure to attach the inner members to the VTR using the screws for all of the four holes.

2.Mount the outer member brackets onto the rack.

Check that the height of the brackets is the same at the left and right.

3.Remove the two front screws on the VTR’s two side panels.

4.Mount the AJ-MA37P rack-mounting adapters using the four supplied M4 screws with spring washers.

Rack-mounting adapter

5.Mount the VTR in the rack.

After mounting the VTR, check that it moves smoothly along the rails.

EIA standard rack

Secure the VTR to the rack here using the anchoring screws.

≥Keep the temperature inside the rack within the i41 °F (5 °C) to 104 °F (40 °C) range. ≥Bolt the rack securely to the floor so that it will not topple over when the VTR is drawn out.

– 50 –

Image 50

Contents Operating Instructions Hardware Operating precaution For your safety GeneralIs the safety information For your safety FCC NoteFor your safety Europe For Your Safety Please Read the Following Text CarefullyContents Features Picture/sound quality at a reasonable priceSlow motion, search and editing functions Specifications and interfacesOperation and maintenance Controls and their functions Audio Monitor1415 16 Cursor≥FROM ≥COPY ≥ENT≥BS UNITY/VARVideo Video OUT Audio Audio OUT 32 TC/CHR SET UP Test Diag28 29 Entry button Shtl button JOG button VAR button Search dialButton After editing 44454647484950 Connectors BNCt4 Power supply partDigital signal input/output section FuseAnalog input/output section 1513141617CUE OUT Parallel Remote control sectionRemote Connections Connection for a single unitConnection for 2 units Connection with an editing controller Tapes ONoteNRecording Preparation ∑ Release the recording inhibit mode∑ Selecting the input signals and adjusting their levels ≥Confirm that the REC Inhibit lamp has gone outPreparation ∑ Setting the time code Operation∑ Audio monitoring ∑ Checking the input signalsSimultaneous playback monitoring ∑ Video monitoring How to display the ≥SYSTEM SET UP menu Menus Home Audio TC/CHR Recording Playback ∑ Monitoring the audio signals∑ Adjusting the audio level Press the Play buttonBasic operations ∑ Stop∑ Shuttle Shtl ∑ Jog≥Preset variable mode ∑ Variable VAR∑ Cue When TC Input is set to the Standard mode∑ Tape speed override TSO function Press the F key and Preroll button together. This results When TC Input is set to the Reverse modeCeding the cue point by the preroll time Cue-up operationEnter the new value with the number keys ∑ Correction of the cue pointMove the cursor to the place which is to be corrected Press the ENT key ≥Cue points cannot be clearedManual editing Manual editing Mode Fade Manual audio cross editingAutomatic insert/assemble editing ONoteN Audio split editing ONotesNOUT point preview Set the F4 VAR Memo key to on Variable memory FunctionSet the F3 W/PLYR key to OFF Plyr Connector signals ∑ Parallel I/O 50P connector Pin no Signal Direction Type Description≥50P error status output table FF Status Output Activel Signal Pin No ∑ Operation Video head cleaning∑ Maintenance ∑ StorageRack-mounting Troubleshooting How to eject the tape in an emergencySyscon microcomputer DIP switch specifications DIP switchAV microcomputer DIP switch specifications Servo microcomputer DIP switch specificationsSpecifications GeneralVideo adjustment ranges Input connectorsOutput connectors Video systemAudio Audio input connectorsAudio output connectors Cue trackAccessory supplied Audio adjustment rangesOther input/output signals Optional accessoryPage Panasonic Broadcast Europe