Panasonic AJ- HD3700B Video system, Input connectors, Output connectors, Video adjustment ranges

Page 54

Specifications

Video system

Sampling frequency/
quantizing	HD: Y: 74.176 MHz; PB/PR: 37.088 MHz/10 bits
	SD: Y: 13.5 MHz; PB/PR: 6.75 MHz/10 bits
Video compression system
(with HD)	Intra-Field DCT i VLC
Video compression rate
(with HD)	1/4
Error correction	Reed-Solomon product code
Data rates	323	Mbps (1080/59.94i/8CH, 720/59.94p/8CH, 480/59.94i/8CH
	319	Mbps (576/50i/8CH)
	300	Mbps (1080/59.94i/4CH, 720/59.94p/4CH, 480/59.94i/4CH)
	258	Mbps (1080/23.98p/8CH, 1080/24p/8CH)
	269	Mbps (1080/50i/8CH, 1080/25p/8CH, 576/50i/8CH)
Samples t active lines (HD)	1080/59.94i, 1080/23.98p, 1080/24p, 1080/25p, 1080/50i: 1920 k 1080/frame
SD video format	720/59.94p: 1280 k 720/frame
SD video format	525 lines/59.94 fields/2:1 interlace (SMPTE 259M)
	625 lines/50 fields/2:1 interlace (ITU-R BT.656-4)

Input connectors

HD serial input

SD serial input

HD reference input

SD reference input

Output connectors

HD serial output

SD serial output

HD reference output SD reference output Analog composite output

1.5Gbps (Embedded Audio, TC), SMPTE 291M/292M standards complied with (BNC k 2 active through)

4:2:2 component SDI (SMPTE 259M/272M/ITU-R BT.656-4 standards complied)

(BNC k 2 active through)

Analog tri-level sync (n0.3V), loop through, 75 ohms, ON/OFF switchable (BNC k 2)

Analog composite, loop through, 75 ohms, ON/OFF switchable (BNC k 2)

1.5 Gbps

Superimposing possible for monitor OUT (BNC k 4)

Component SDI output (SMPTE 259M/272M/294M°/ITU-R BT.656-4 standards complied with) (BNC k 3)

Superimposing possible for monitor OUT

°525p mode output (excluding monitor output) with 1080/23p or 720/59.94p system

Analog HD tri-level sync (n0.3 V) (BNC k 1) Black burst (BNC k 1)

Video 1/video 2/video 3 (superimposing ON/OFF) (BNC k 3)

Video adjustment ranges

HD SDI Y output gain HD SDI PB output gain HD SDI PR output gain HD SDI Y black level

HD SDI output system phase SD SDI Y output gain

SD SDI PB output gain SD SDI PR output gain SD SDI black level

SD SDI output system phase

j¶–i3 dB j¶–i3 dB j¶–i3 dB n100 mV

n0.5 H (1 sample l 13.5 ns) j¶–i3 dB

j¶–i3 dB j¶–i3 dB n100 mV j2.5 HTi1.5 H

– 54 –

Image 54

Contents Operating Instructions Hardware For your safety General Is the safety informationOperating precaution For your safety FCC NoteFor your safety Europe For Your Safety Please Read the Following Text CarefullyContents Features Picture/sound quality at a reasonable priceSpecifications and interfaces Operation and maintenanceSlow motion, search and editing functions Controls and their functions Audio Monitor1415 16 Cursor≥FROM ≥COPY ≥ENT≥BS UNITY/VAR32 TC/CHR SET UP Test Diag 28 29Video Video OUT Audio Audio OUT Shtl button JOG button VAR button Search dial Button After editingEntry button 44454647484950 Connectors BNCt4 Power supply partDigital signal input/output section FuseAnalog input/output section 1513141617CUE OUT Remote control section RemoteParallel Connections Connection for a single unitConnection for 2 units Connection with an editing controller Tapes ONoteNRecording Preparation ∑ Release the recording inhibit mode∑ Selecting the input signals and adjusting their levels ≥Confirm that the REC Inhibit lamp has gone outPreparation ∑ Setting the time code Operation∑ Checking the input signals Simultaneous playback monitoring ∑ Video monitoring∑ Audio monitoring How to display the ≥SYSTEM SET UP menu Menus Home Audio TC/CHR Recording Playback ∑ Monitoring the audio signals∑ Adjusting the audio level Press the Play buttonBasic operations ∑ Stop∑ Shuttle Shtl ∑ Jog≥Preset variable mode ∑ Variable VARWhen TC Input is set to the Standard mode ∑ Tape speed override TSO function∑ Cue Press the F key and Preroll button together. This results When TC Input is set to the Reverse modeCeding the cue point by the preroll time Cue-up operationEnter the new value with the number keys ∑ Correction of the cue pointMove the cursor to the place which is to be corrected Press the ENT key ≥Cue points cannot be clearedManual editing Manual editing Mode Fade Manual audio cross editingAutomatic insert/assemble editing ONoteN Audio split editing ONotesNOUT point preview Variable memory Function Set the F3 W/PLYR key to OFFSet the F4 VAR Memo key to on Plyr Connector signals ∑ Parallel I/O 50P connector Pin no Signal Direction Type Description≥50P error status output table FF Status Output Activel Signal Pin No ∑ Operation Video head cleaning∑ Maintenance ∑ StorageRack-mounting Troubleshooting How to eject the tape in an emergencySyscon microcomputer DIP switch specifications DIP switchAV microcomputer DIP switch specifications Servo microcomputer DIP switch specificationsSpecifications GeneralVideo adjustment ranges Input connectorsOutput connectors Video systemAudio Audio input connectorsAudio output connectors Cue trackAccessory supplied Audio adjustment rangesOther input/output signals Optional accessoryPage Panasonic Broadcast Europe