Panasonic AJ- HD3700B manual Cue track, Audio input connectors, Audio output connectors

Page 55

Specifications

Composite video output
Y gain	j¶–i3 dB (synchronized to SD SDI)
Composite video output
PB/PR gain	j¶–i3 dB (synchronized to SD SDI)
Composite video output
setup	n14 IRE (synchronized to SD SDI)
Composite video output
system phase	n0.5 H
Composite video output SYS
SC phase	more than n180 °

Audio

Sampling frequency	48 kHz (synchronized to video)
Quantizing	1080/23.98p, 1080/24p, 1080/25p, 1080/50i and 576/50i: 24 bits
	20 or 24 bits selected for 1080/59i, 720/59.94p and 480/59.94i
Frequency response	20 Hz to 20 kHz n0.5 dB (reference level)
Dynamic range	More than 100 dB (1 kHz, emphasis OFF): 20 bits
	More than 105 dB (1 kHz, emphasis OFF): 24 bits
Distortion	Less than 0.03% (1 kHz, emphasis OFF, reference level): 20 bits
	Less than 0.01% (1 kHz, emphasis OFF, reference level): 24 bits
Crosstalk	Less than j80 dB (1 kHz, between 2 channels)
Wow & flutter	Below measurable limits
Headroom	20 dB/18 dB switchable

Cue track

Frequency response100 Hz to 12 kHz n3.0 dB

Audio input connectors

Analog input (CH1–CH4)	i4/0/j20 dBm (dBu) switchable (with 600 ≠ load), 600 ≠/high impedance
Digital input	(switchable) (XLR k 4)
Digital input	AES3 format (75 ohms, unbalanced) (BNC k 4)
(CH1/CH2, CH3/CH4,	(No operation for CH5/CH6 and CH7/CH8 in 480/59.94i/4CH,
CH5/CH6, CH7/CH8)	1080/59i/4CH or 720/59p/4CH format)
Cue track input	i4/0/j20 dBm (dBu) switchable (with 600 ≠ load), 600 ≠/high impedance
	(switchable) (XLR k 1)

Audio output connectors

Analog output (CH1–CH4)	i4/0/j20 dBm (dBu) switchable (with 600 ≠ load), low impedance (XLR k 4)
Digital output	AES3 format (75 ohms, unbalanced) (BNC k 4)
(CH1/CH2, CH3/CH4,	[When the 1080/59.94i/4CH, 720/59p/4CH or 480/59.94i/4CH format is
CH5/CH6, CH7/CH8)	selected, either no sound is output or the sound of CH1/CH2 and
	CH3/CH4 is copied and output as the sound for CH5/CH6 and CH7/CH8.
	(AUTO COPY function)]
Cue track output	i4/0/j20 dBm (dBu) switchable (with 600 ≠ load), low impedance (XLR k 1)
Monitor output	L/R, i4/0/j20 dBm (dBu) switchable (with 600 ≠ load), low impedance
Headphone output	(XLR k 2)
Headphone output	Level variable
	(dBu): applied for AJ-HD3700BE.

– 55 –

Image 55

Contents Operating Instructions Hardware Is the safety information For your safety GeneralOperating precaution FCC Note For your safetyFor Your Safety Please Read the Following Text Carefully For your safety EuropeContents Picture/sound quality at a reasonable price FeaturesOperation and maintenance Specifications and interfacesSlow motion, search and editing functions Audio Monitor Controls and their functionsCursor 1415 16UNITY/VAR ≥ENT≥BS ≥FROM ≥COPY28 29 32 TC/CHR SET UP Test DiagVideo Video OUT Audio Audio OUT Button After editing Shtl button JOG button VAR button Search dialEntry button 44454647484950 Fuse Power supply partDigital signal input/output section Connectors BNCt41513141617 Analog input/output sectionCUE OUT Remote Remote control sectionParallel Connection for a single unit ConnectionsConnection for 2 units Connection with an editing controller ONoteN Tapes≥Confirm that the REC Inhibit lamp has gone out Preparation ∑ Release the recording inhibit mode∑ Selecting the input signals and adjusting their levels RecordingOperation Preparation ∑ Setting the time codeSimultaneous playback monitoring ∑ Video monitoring ∑ Checking the input signals∑ Audio monitoring How to display the ≥SYSTEM SET UP menu Menus Home Audio TC/CHR Recording Press the Play button ∑ Monitoring the audio signals∑ Adjusting the audio level Playback∑ Stop Basic operations∑ Jog ∑ Shuttle Shtl∑ Variable VAR ≥Preset variable mode∑ Tape speed override TSO function When TC Input is set to the Standard mode∑ Cue Cue-up operation When TC Input is set to the Reverse modeCeding the cue point by the preroll time Press the F key and Preroll button together. This resultsPress the ENT key ≥Cue points cannot be cleared ∑ Correction of the cue pointMove the cursor to the place which is to be corrected Enter the new value with the number keysManual editing Manual editing Manual audio cross editing Mode FadeAutomatic insert/assemble editing ONoteN ONotesN Audio split editingOUT point preview Set the F3 W/PLYR key to OFF Variable memory FunctionSet the F4 VAR Memo key to on Plyr Connector signals Pin no Signal Direction Type Description ∑ Parallel I/O 50P connector≥50P error status output table FF Status Output Activel Signal Pin No ∑ Storage Video head cleaning∑ Maintenance ∑ OperationRack-mounting How to eject the tape in an emergency TroubleshootingServo microcomputer DIP switch specifications DIP switchAV microcomputer DIP switch specifications Syscon microcomputer DIP switch specificationsGeneral SpecificationsVideo system Input connectorsOutput connectors Video adjustment rangesCue track Audio input connectorsAudio output connectors AudioOptional accessory Audio adjustment rangesOther input/output signals Accessory suppliedPage Panasonic Broadcast Europe