■Connecting Amplifier (5.1 ch Surround system) [Digital connection] DECK Dolby Digital Decoder Amplifier Speaker
or
DECK DTS (Digital Theater Systems) Decoder Amplifier Speaker
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK OPTICAL digital audio output connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy
Notes on connecting an optical digital audio cable (optional)
•Remove the attached cap, and firmly connect the cable to the connector.
|
| Surround | Surround |
|
| Speaker | Speaker |
|
| [5.1ch Surround system] |
|
|
| Center |
|
DVD/VCR DECK |
| Speaker |
|
|
|
| |
(Rear) | Decoder with |
| Front |
| Dolby Digital /DTS | Front | |
| processing (optional) | Speaker | Speaker |
Initial Setup
Optical Digital Audio Cable (optional)
To Optical
Digital Audio
Input Connector
Amplifier
Subwoofer
Caution for optical digital audio output connector:
•When connecting an amplifier (with an Optical Digital Input Connector) which does not contain the Dolby Digital or DTS decoder, be sure to select “PCM” at “Dolby Digital” and “PCM” at “dts” of the Settings for DVD Operation “Audio Output” (see p. 53).
Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers.
•When a Dolby Digital/DTS decoder is connected, please select “Bitstream” at “dts” or “Dolby Digital” of the Settings for DVD Operation “Audio Output”.
If “PCM” is selected, there will be stereo sound. (See p. 53.)
•Video CDs and CDs can be played as usual.
Note
•Some DTS decoders which do not support
15