
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again.
PROGRESSIVE OUT
Sets the Component Video Output Connector (p. 10, 13) to output the Progressive scan signal.
1Press ACTION
to display DVD MAIN MENU.
2 | Press | to select |
| |
“PROGRESSIVE OUT,” |
| |||
| and |
|
| |
| press SET repeatedly |
| ||
| for mode. (See below.) |
| ||
OFF: | Progressive scan signal is not output. |
| ||
ON: | Progressive scan signal is output from the |
| ||
| Component Video Output Connector. |
| ||
Press ACTION |
|
| ||
3 to exit this mode. |
|
| ||
Notes |
|
| ACTION | |
• If the television is not progressive compatible, a | ||||
SELECT | ||||
progressive scan picture is not available. Connect the | ||||
| ||||
Video Output or | SET | |||
13) and set PROGRESSIVE OUT to “OFF”. |
• CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED TO SET
PROGRESSIVE OUT TO “OFF”.
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p DVD/
VCR DECK, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
DVD Operation
55