Panasonic PV-D4735S Tape Select, Tape Position Display, Press SET, Action, Press Tape Position

Tape Operation (continued)

Tape Select

Select your tape length so the tape position and amount of tape remaining are properly displayed.

(See “Tape Position Display” section below.)

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

	Press ACTION
1 to display MENU.
2		Press	to select
		“SET UP VCR,” and
		press SET.
3		Press	to select “TAPE
		SELECT,” and press SET
		to set
		“T-120,” “T-160” or “T-180.”
		T-120	T-160	T-180

•Select “T-120” for tapes 120 minutes or less, “T-160” if 140 or 160 minutes, and “T-180”

if 180 minutes.

4Press ACTION

to return to normal screen.

Tape Position Display

To find out the present tape position and amount of tape remaining.

Tape position is displayed incorrectly in the following cases:

•If VHS-C type cassettes, tapes under 30 minutes, tapes over 180 minutes, or incompatible tapes are used.

•If the correct tape length is not selected. (See “Tape Select” section above.)

ACTION

SELECT

SET

TAPE

POSITION

1Press TAPE POSITION

to detect current tape position.

• “DETECTING TAPE POSITION”

DETECTING TAPE POSITION

only appears the first time a

cassette is inserted and it takes several seconds for correct indication to appear.

• The present tape position indication and amount of tape remaining (according to tape

speed) are displayed.

Tape remaining time display may

not be precise.

2Press TAPE POSITION

(or wait 5 seconds) to return to normal screen.

32 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo