Panasonic PV-D4735S operating instructions Before Using

PV-D4735S

Batteries 2 “AA”

RF Coaxial Cable LSJA0418

To order accessories, call toll free

1-800-332-5368.

Before Using

Congratulations

on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your DECK.

•Date of Purchase

•Dealer Purchased From

•Dealer Address

•Dealer Phone No.

• Model No.

• Serial No.

Accessories

Remote Control

EUR7724KE0

Head Cleaning

Playing older or damaged tapes may eventually cause video heads to become clogged.

Video Head Clog Sensor

During playback, this screen appears if clogging is detected. To remove screen, press PLAY on the remote or DECK.

•Use “dry” type head cleaning cassette only. (Part No. NV-TCL30PT is recommended.)

•Follow cleaning tape instructions carefully. Excessive use of tape can shorten head life.

•If head clog symptoms persist, contact your nearest servicenter by visiting our Web Site (see p. 61).

Cleaning DECK

Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holes on the back sides and bottom of the cabinet.

Plastic surfaces are easily scratched and can be marred by alcohol and various solvents.

Avoid excessive use of oil-based furniture polishes since the materials used in the cabinet will accumulate more dust. We recommend using a non-abrasive, antistatic cleaner and polisher.

Loading the Batteries

1) Open cover.

2) Insert batteries as marked.

3) Close cover.

Battery replacement caution

•Do not mix old and new batteries.

•Do not mix alkaline with manganese batteries.

Record/ Playback Time

Only use tapes with the mark in this DECK.

Tape Speed		Type of Video Cassette
Setting		T120	T160	T180
SP	2	Hours	2 Hours	3 Hours
(Standard Play)			40 Minutes
SLP	6	Hours	8 Hours	9 Hours
(Super Long Play)

Features for a Quality Picture (VCR)

Digital Auto Picture

Automatically controls the video output signal for less noise depending on the tape condition.

Digital Auto Tracking

Continuously analyzes the signal and adjusts for optimum picture quality.

Manual Tracking Control (to reduce picture noise)

Use during Playback and Slow Motion mode to reduce picture noise.

Press CH (TRACKING) / on the remote control or on DECK until the picture clears up.

To return to Auto Tracking, press POWER off, then on again a few seconds later.

R		R
R	R	R	R
	R		R

V-Lock Control (to reduce picture jitter)

In Still mode, CH (TRACKING) / operate as a V-Lock control.

4For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo