Panasonic PV-D4753S manual Rear View of Deck, To enjoy Progressive Scan video, AC Power Plug

Location of Controls (continued)

Rear View of DECK

AC Power Plug

•While plugged into an AC outlet, this DECK consumes 4 W of electrical power in off mode.

Bold:	VCR Function	Italic: DVD Function
Bold Italic: VCR and DVD Functions

VHF/UHF Antenna Output Terminal p.12

VHF/UHF Antenna Input Terminal p. 12

Component Video Output Connector (Y, PB, PR) (DVD Only)

p.13

5.1ch Analog Audio Output Connector (CENTER, SUB WOOFER, SURROUND L/R, FRONT L/R)

(DVD Only) p. 15

Video Output	Video Input
Connector	Connector
p. 12	p. 35

• • •

Optical Digital Audio	S-Video Out	Audio Output 2	Audio Input
Output Connector	Connector	Connector (L/R)	Connector (L/R)
(DVD Only)	(DVD Only)	p. 13	p. 35
p. 15	pp. 10, 13	Audio Output 1
		Connector (L/R)
		p. 12

The following table shows the status of the output jacks when in VCR or DVD mode.

		Video Output	Component		S-VIDEO OUT
		Audio Out 1
			Video Output
		Audio Out 2
VCR		YES	N/A		N/A
DVD		YES		YES
Note •	PROG functions on the remote are not available when using Component Video Output
	and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press

PROG.

To enjoy PROGRESSIVE SCAN video

(1). Connect Component Video Output to the component video input terminals of a television. (See p. 13.)

(2). When the PROGRESSIVE button is pressed, the ON lamp lights up (see p. 9) and the

PROGRESSIVE SCAN signal is output from the Component Video Output Connector.

Notes

•The PROGRESSIVE button can be operated when the DECK is in DVD function mode.

•The screen may shift off-center when using progressive output. Please adjust the screen position if this occurs. (Refer to your TV manual.)

•The DECK outputs video signals (not PROGRESSIVE SCAN) from the “VIDEO OUT” and “S-VIDEO OUT” terminals when the ON lamp is lit.

10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com