Panasonic PV-D4753S manual Test Signal Setup, Still Mode, TV Mode, Example

*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again.

Test Signal Setup

This feature assists in the setting of OUTPUT BALANCE. Starting with (L) front speaker, a test sound is output in clockwise order. While the test signal is output, adjust the output of the center speaker and Surround speaker (R/L).

(See “Output Balance Setup.” P. 52.)

1 Do steps 1~2 of “Output Balance Setup” on page 52.

2	OUTPUT BALANCE		Press
	SURROUND(R)	: 0dB	to select “TEST
	CENTER	: 0dB
	SURROUND(L)	: 0dB	SIGNAL,” and
	SUBWOOFER	: 0dB
	TEST SIGNAL	: OFF	press SET.
	SELECT	:	(See below.)
	SET	: SET
	END	: ACTION

No sound will come from the subwoofer. Adjust as desired when playing a disc. While the TEST SIGNAL is output, if the setting change in the OUTPUT BALANCE (p. 52) is under 2 seconds, the output will switch to the next speaker. The speaker name from which the TEST SIGNAL is currently being output is displayed. (Example; "TEST SIGNAL : CENTER")

2sec 2sec

OFF FRONT(L) CENTER FRONT(R)

2sec 2sec

SURROUND(L) SURROUND(R)

2sec

3 Press ACTION four times to exit.

FRONT(L)FRONT(R)

	B1
CENTER
Listening	SUBWOOFER
position

SURROUND(L)	SURROUND(R)
	C1

<Speaker Position>

Still Mode

Set to reduce jitter in a displayed still picture or a motion picture.

	Press ACTION
1 to display DVD MAIN MENU.
2		DVD MAIN MENU		Press
		AUDIO OUTPUT		to select “STILL MODE,”
		DISC LANGUAGES
				and
		TV MODE	: 4 : 3 L e t t e r b o x
		ST I L L MODE	: AUTO
		P A R E N T A L L O C K : L E V E L 8		press SET repeatedly
		SELECT	:	for mode. (See below.)
		SET	: SET
		END	: ACTION

AUTO: “FIELD” (Field still) or “FRAME” (Frame still) is automatically selected during the still mode. (Factory preset)

FIELD: “FIELD” (Field still) is always selected.

This setting will reduce jitter when compared with “AUTO” on some discs.

FRAME: “FRAME” (Frame still) is always selected.

Some texts and fine patterns will be seen clearly when compared with “AUTO” on some discs.

3 Press ACTION

to exit this mode.

TV Mode

Set the screen display style for wide-screen video material playback.

	Press ACTION
1 to display DVD MAIN MENU.
2		DVD MAIN MENU		Press	to select “TV
		AUDIO OUTPUT		MODE,” and press SET
		DISC LANGUAGES		repeatedly for
		TV MODE	: 4 : 3 L e t t e r b o x
		ST I L L MODE	: AUTO
		P A R E N T A L L O C K : L E V E L 8		mode.
		SELECT	:	(See below.)
		SET	: SET		DVD Operation
		END	: ACTION

4:3 Pan & Scan (Factory preset) : Wide-screen video data is played in Pan & Scan style (left and right of screen is trimmed.)

• Video data not formatted in Pan & Scan will play in letterbox style.

4:3 Letterbox :

Wide-screen video data is played in Letterbox style (top and bottom of screen has black margin).

16:9 :

Set “16:9” when using Wide-screen TV.

3 Press ACTION

to exit this mode.

TV Mode	[Pan & Scan (Factory preset)]	[Letterbox]
Example
		53