Panasonic PV-D4753S manual Output Balance Setup, Delay Time Setup

Settings for DVD Operation (continued)

Output Balance Setup

Adjust the volume level output from the speakers. To adjust, play a disc or set the “TEST SIGNAL” (p.53) to ON. Then adjust while confirming the volume. (Even if “OFF” or "NONE" is set in “SPEAKER SIZE,” the speaker OUTPUT BALANCE can still be set.)

1

2

Do steps 1~2 of “Speaker Output Setup” on page 51.

OUTPUT BALANCE		Press *
		to select “OUTPUT BALANCE,” and press SET
SURROUND(R)	: 0dB
CENTER	: 0dB
SURROUND(L)	: 0dB	to display OUTPUT BALANCE screen.
SUBWOOFER	: 0dB
TEST SIGNAL	: OFF	Press
SELECT	:	to select an item, and press SET repeatedly.
SET	: SET	(See below table.)
END	: ACTION

Menu item	Setting	Remark
CENTER		Adjust so that the center speaker volume is virtually the same
		level (-6dB ~ +6dB) as the front speakers.
	-6dB ~ +6dB
SURROUND(R)		Adjust so that the surround speaker(R) volume is virtually
		the same level (-6dB ~ +6dB) as the front speakers.
SURROUND(L)		Adjust so that the surround speaker(L) volume is virtually
	0dB(factory preset)	the same level (-6dB ~ +6dB) as the front speakers.
SUBWOOFER		Adjust so that the subwoofer speaker volume is optimum.
		However, because no test sound will come from the
		subwoofer, play a disc to confirm, then adjust.

TEST SIGNAL : Switch test signal used for OUTPUT BALANCE setting to “OFF” or “FRONT(L)”....

➡See page 53.

3 Press ACTION four times to exit.

Delay Time Setup

To enjoy 5.1 CH sound, it is ideal to place all speakers, except the subwoofer, in a circular arrangement. (See <Speaker Position> p. 53.)

If this is not possible, setting Delay Time gives the sound output a delayed effect which gives you the illusion of the ideal listening position. (See right.)

1 Do steps 1~2 of “Speaker Output Setup” on page 51.

2 Pressto select “DELAY TIME,” and press SET to display DELAY TIME screen.

Press

to select an item, and press SET repeatedly. (See below.)

Menu item					Setting						Remark
CENTER	0ms	1ms		2ms		3ms		4ms		5ms	Setting a delay effect.
											0ms(Factory preset)
SURROUND	0ms		5ms		10ms		15ms		20ms

3 Press ACTION three times to exit.

[See <Speaker Position> p.53.]

•, : Delay time as 0ms (Factory prest)

•, < : Find the distance B1 , C1 in the table (below) and change to the recommended setting.

B1 Center speaker

	Distance B1	Setting
	Approx. 50 cm (11/2 feet)	1.3 ms
	Approx. 100 cm (3 feet)	2.6 ms
	Approx. 150 cm (5 feet)	3.9 ms
	Approx. 200 cm (6 feet)	5.3 ms
C1 Surround speaker

Distance C1	Setting
Approx. 200 cm (6 feet)	5.3 ms
Approx. 400 cm (12 feet)	10.6 ms
Approx. 600 cm (18 feet)	15.9 ms

52 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com