Panasonic PV-D4753S manual Connecting Amplifier 5.1 ch Surround system, Analog connection

■Connecting Amplifier (5.1 ch Surround system)

Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers. There are two types of connection, digital and analog.

A. Digital connection (DECK OPTICAL Digital Audio Output Connector)

When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK OPTICAL Digital Audio Output Connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality audio in your home. [An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or DTS decoder is used.]

B. Analog connection (5.1 ch Analog Audio Output Connector)

Connect an amplifier with multi-channel audio input terminals. This DECK can decode Dolby Digital and DTS. There are no limitations on sampling frequency with this kind of connection.

(Connection) Initial Setup

Notes on connecting an optical digital audio cable (optional)

• Firmly connect the cable to the connector.

Surround				Surround
Speaker				Speaker
		[5.1 ch Surround system]
			Center
			Speaker
	Front			Front
	Speaker			Speaker

Amplifier

B. Analog connection

To multi-channel audio input terminals

DVD/VCR DECK (Rear) Decoder with Dolby Digital /DTS processing

A. Digital connection

Optical Digital Audio

Cable (optional)

Subwoofer

To Optical Digital Audio

Input Connector

Caution for optical digital audio output connector:

•When connecting an amplifier (with an Optical Digital Input Connector) which does not contain the Dolby Digital or DTS decoder, be sure to select “PCM” at “Dolby Digital” and “PCM” at “dts” of the Settings for DVD Operation “Audio Output” (see p. 50). Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers.

•When a Dolby Digital/DTS decoder is connected, please select “Bitstream” at “dts” or “Dolby Digital” of the Settings for DVD Operation “Audio Output”.

If “PCM” is selected, there will be stereo sound. (See p. 50.)

•Video CDs and CDs can be played as usual.

Note:

•Some DTS decoders which do not support DVD-DTS interface may not work properly with

DECK. 15