Panasonic PV-D4753S manual Audio Output, Speaker Setup

Settings for DVD Operation (continued)

Audio Output

Select the digital output to be output from the optical digital audio output connector of DECK.

	Press ACTION*
1 to display DVD MAIN MENU.
2		DVD MAIN MENU		Press
		AUDIO OUTPUT		to select
		DISC LANGUAGES
		ST I L L MODE	: AUTO	“AUDIO OUTPUT,”
		TV MODE	: 4 : 3 L e t t e r b o x
		P A R E N T A L L O C K : L E V E L 8		and
		SELECT	:	press SET
		SET	: SET	to display screen.
		END	: ACTION
3		AUDIO OUTPUT		Press
				to select an item,
		D o l b y D i g i t a l : B i t s t r e a m
		LPCM(DVD)	: OFF
		d t s	: B i t s t r e a m	and
		DRC	: OFF
		SPEAKER SETUP		press SET
		SELECT	:	repeatedly for
		SET	: SET	output. (See below.)
		END	: ACTION

■“LPCM (DVD)” selections

OFF: Linear PCM of less than 48 kHz/16 bit is output. When playing DVDs recorded in linear PCM of over 48 kHz/20 bit, no digital audio is output. (Factory preset)

PCM: When playing DVDs recorded in linear PCM of 48 kHz/20 bit/24 bit or more, digital audio converted to 44.1 kHz/16 bit or 48 kHz/16 bit is output.

(Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection.)

Ready Checklist

DECK is in DVD mode, press DVD.

Type of amplifier		Recommended setting
	LPCM			Dolby
to be connected						D T S
	(DVD)		Digital
No amplifier is connected
AV amplifier (with digital
audio input connector)	PCM		PCM* 1		PCM*1
without Dolby Digital/DTS
decoder
AV amplifier including	PCM		Bitstream			PCM
Dolby Digital decoder
AV amplifier including			Bitstream		*2
Dolby Digital/DTS decoder	PCM				Bitstream

•Make settings according to amplifier connected to optical audio output as shown in above table.

*1 When connecting an amplifier (with an optical digital input connector) which does not contain the Dolby Digital or DTS decoder, be sure to select “PCM”.

If “Bitstream” is selected, starting DVD play may cause such a high level of noise as to be harmful to your ears and damage the speakers.

*2 When a DTS decoder is connected, please select “Bitstream” in “dts”.

■“Dolby Digital” selections

Bitstream: Dolby Digital bitstream (1 ch - 5.1 ch) is output. (Factory preset)

PCM: When you have connected a amplifier that doesn’t have a built-in Dolby Digital decoder.

■“dts” selections

Bitstream: DTS bitstream is output. (Factory preset)

PCM: When you have connected a amplifier that doesn’t have a built-in DTS decoder.

■“DRC (Dynamic Range Compression)”

selections

OFF: Normal audio range is selected. (Factory preset)

ON: For dynamic sound even at low volume, this is useful for late-night listening. [Dolby Digital DVDs only].

■SPEAKER SETUP

➡ See pages 51, 52, 53.

4 Press ACTION to redisplay DVD MAIN MENU and go to step 2 to setup another item.

Or, press ACTION twice to exit.

50 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com