Connections
Basic Connections
•If your TV has AUDIO and VIDEO IN terminals, connect them to DECK with AV Cable for higher quality picture and sound.
•You can enjoy stereo sound even if your TV is not stereo by connecting a stereo amplifier to DECK.
•Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable b (not supplied) as shown in the figure below.
■ DSS ReceiverDECKTV ■ DECKTV ■ Cable BoxDECK TV
DSS Receiver
|
| Antenna or Cable |
IN | IN | IN |
|
| |
| OUT | OUT |
Cable Box
or
1 Disconnect antenna or cable from TV and connect to DECK.
2 Connect DECK to TV with RF Coaxial Cable.
DVD/VCR DECK
OUT | IN 1 IN FROM ANT. |
VIDEO |
|
L | VHF/UHF |
AUDIO | OUT TO TV |
R
a RF COAXIAL CABLE
TV
VHF/
UHF
AUDIO IN VIDEO
R L IN
b AV CABLE (not supplied)
WARNING
When using “Nut type” RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
Note to CABLE system installer
This reminder is provided to call the CABLE system installer’s attention to Article
12 | For assistance, please call : |
|