Panasonic PV-D4761 Reset All Memory Functions, Press SET to enter Press CH, Press Action twice

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

5	SELECT CONNECTION
	CABLE / DSS BOX VCR TV
	CABLE / DSS BOX OUTPUT CH
		CH 01
	SELECT :		SET : SET
	EXIT	: ACT I ON
6 CHANNEL/ CLOCK AUTO SET
	CONNECT ANTENNA CABLE
	AND	I F YOU USE A CABLE
	BOX, TUNE I T TO YOUR
	LOCAL PBS CH		THEN. . .

PLEASE PRESS CH UP KEY

Press

to select the same channel as the Cable Box or DSS Receiver output channel.

Press SET to enter.

Press CH

to start “CHANNEL/CLOCK AUTO SET.”

(Connection) Initial Setup

7	Settings are performed automatically.
	Case 1 Setup complete...

Case 2 Setup Incomplete...

1/	4/ 2001 THU 12 :00PM	Press CH
		to exit.
	DST : ON
	SETT I NG : CH 02
	AUTO CLOCK SET
	COMPLETED
END	: CH UP KEY

Reset All Memory Functions

Use when moving DECK to new location, or if a mistake was made in the Initial Setup section.

•Make sure a tape is not inserted in DECK.

1 Turn DECK Power on.

2 Press and hold both PLAY and CHANNEL on DECK for more than 5 seconds.

•The power shuts off.

•Please ignore “NO CASSETTE” warning.

3 Do “Initial Setup” on p. 16.

AUTO CLOCK SET IS

I NCOMPLETE

PLEASE SET CLOCK BY PRESSING ACT I ON KEY

	SET CLOCK
1/ /	:
		DST : ON
-----------------------
SESELE CT MONTHTH
SELECT :
SET	:SET
EXIT	: ACT I ON

SET CLOCK

1/ 4/2001 THU 12:00PM

		DST : ON
-----------------------
SET COMPLETED
SET	: SET	BACK :
START	: ACT I ON

Press ACTION to display Manual Clock Set screen.

Press

to select the month and

press SET.

In the same manner, select and set the date, year, time, and DST (daylight saving time).

Press ACTION twice

to start CLOCK and exit.

17