Panasonic PV-D4761 operating instructions Operation

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Review, Replace or Clear Program Contents:

(Recording is not in progress)

1 Repeat steps 1 ~ 2 on page 24.

2	P DT START STOP				CH SPD		Press
	1	7	9	: 00A 12 : 00A	08	SP	to select number and
	2	8 10		: 00P 12 : 00P	02	SP
	3	10	8	: 00P 9 : 00P	10	SP	press SET
	4	SU	9	: 00P 10 : 00P	L1	LP
	CANCEL : ADD / DLT						to display.
	SELECT 1-8 :
	ENTER			: SET
	EXIT			: PROG

3 To Replace program...

DATE		START	STOP		CH	Repeat Step 3 (p. 24)
7 SUN		9:00A 12:00A			08	to set new programs.
TODAY					SP
	----------------------------------------
SELE CT START DATE
SELECT		:
SET		: SET		BACK :
END		: PROG

or

To Clear program...

P DT START				STOP		CH SPD Press ADD/DLT.
1	-- -- : -- -- : --					--	--
2	8 10		: 00P 12		: 00P	02	SP
3	10	8	: 00P	9	: 00P	10	SP
4	SU	9	: 00P 10		: 00P	L1	LP
CANCEL : ADD / DLT
SELECT 1-8 :
ENTER			: SET
EXIT			: PROG

4 Press PROG/VCR+ button to end the program.

To cancel Timer Recording

in progress...

Hold down STOP on VCR mode for a few seconds to cancel Timer Recording.

(The “TIMER” indicator goes out on Multi Function Display.)

•Any future daily or weekly recording will be performed as programed.

VCR

Operation

Notes

•If you are using Cable Box, the VCR’s channel for Timer Recording must be set to the Cable Box output channel and Cable Box must be manually set to the desired channel. Cable Box power must be left on.

•2 minutes before Timer Recording is performed, “PLEASE PREPARE FOR TIMER REC” appears and Timer Indicator flashes.

Be sure a cassette with record tab is loaded and DECK is in Stop mode.

•If a power interruption occurs while programming the timer, the timer program(s) may be canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears on-screen, please reenter the timer programs.

•If the start time for Timer Recording comes up during recording and playing back, Timer Recording will not be performed.

Important notes when using DSS Receiver

•When recording programs via DSS Receiver, DSS Receiver must be left on.

•When recording programs via an antenna or cable, DSS Receiver must be turned off.

25