Panasonic PV-D4761 operating instructions Record using Deck buttons

Page 21

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Record on a Tape

1 Insert a tape with a record tab (p. 6).

• DECK power comes on.

The VCR mode and “VCR” Indicator light up on Multi Function Display.

2 Press CH / , or NUMBER keys to select the channel.

•For “LINE” input, see p. 39.

•If channels is over 100, press 100 key then press the remaining 2 digits.

3 Press SPEED

to select the record speed (p. 6).

SP = Standard Play	LP = Long Play
SLP = Super Long Play

• Speed appears on-screen and on Multi Function Display.

4 Press REC

to start recording.

(The VCR REC Indicator lights up on Multi Function Display),

•To edit out unwanted scenes, press PAUSE/STILL to pause, and again to resume recording.

•You cannot view another channel during recording.

This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use

tapes with the mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended.

Note

	Remove loose or peeling
	labels from tapes	Basic Operation
	to prevent tape jam.	Basic Operation
	to prevent tape jam.

Press STOP

5 to stop recording.

One Touch Recording (recording in progress),

Normal Rec

0:30

1:00

--> Press REC repeatedly to set the recording length

(30 min. ~ 4 hours).

4:00

3:00

2:00

1:30

• DECK shuts off after the preset record length.

Record one station, watch another,

-->press VCR/TV

(“VCR” goes out on Multi Function Display), --> select channels at TV (recording continues).

Select channels at DECK, -->press VCR/TV

(“VCR” lights up on Multi Function Display), --> select channels at DECK.

Play a disc while recording a tape.

--> insert a disc during recording,

--> press DVD, and then press PLAY.

Notes

•It is not possible to record from DVD/ Video CD/ CD to VHS tape using DECK.

•Watching one channel and recording another is not possible when using Cable Box or DSS Receiver.

•After 5 minutes in Pause mode, DECK stops to protect a tape and video heads.

Record using DECK buttons

1Insert a tape.								4 Press REC
1Insert a tape.								4 Press REC
								to start
		VCR/TV						Recording.

2 Select		Multi Function Display
Channel.
		Press STOP/EJECT to stop.
		Press STOP/EJECT to stop.

21

Image 21

Contents Model No. PV-D4761 Operating InstructionsImportant Safeguards and Precautions Region Management Information Inside of productFCC Caution Accessories Before UsingDisc Handling Loading the BatteriesTable of Contents Deck & Cassette Information Definition of Terms DVD SpecificationsLight Tower Universal Remote Control Remote ControlLocation of Controls Number keysSTOP/EJECT Fast FORWARD/SEARCH Play REWIND/SEARCH Front View of DeckChannel TRACKING/V-LOCK RECRear View of Deck Displays On Screen & Multi Function On Screen Displays VCRMulti Function Display Basic Connections ConnectionsDSS Receiver Deck TV Deck TV Cable Box Deck TV OUTDeck Cable Box TV Other Connections You CanConnect With Two Cable Boxes Connections For DVD OnlyAudio Connections Ready ChecklistDeck Amplifier Speaker DVDFirmly connect the cable to the connector To Optical Digital Audio Input ConnectorHow to do Initial Setup Initial Setup for Basic ConnectionsPower VCR VCR/TV Action Select SET DECK-TVPress SET to enter Press CH Reset All Memory FunctionsPress Action to display Manual Clock Set screen Press Action twiceReset Language, Channels, Clock Press ActionTo display Menu VCR’s Output Channel Add or Delete a ChannelDST Daylight Saving Time Playback/ Record on a Tape Playback using Deck buttonsRapid Rewind/FF REW/SLOW VCR/TV StopRecord using Deck buttons Basic DVD Operation Operation using Deck buttonsTo return to menu play stops Press OPEN/CLOSEAuto-Power Off Function Surround Sound SystemResume Function ADD/DLT Prog VCR+ Select SET Timer RecordingOperation Press SET or Action Timer Recording Using VCR Plus+ SystemVCR Plus+ System is Important NoteIf channel updating If VCR could not Was successful Before you perform the following steps, you should haveTo select channel map for Your areaChannel Setup Initial SetupPress Action three times to end setup To Make CorrectionsPress Number keys Press PROG/VCR+ button to display SET ProgramPress repeatedly Action ADD/DLT Prog VCR+ Select SETMTS Broadcast/ VHS Hi-Fi Stereo System Receivable Broadcast TypesDisplay Audio Audio Mode for Playback Audio Mode for RecordingMulti-Brand Control Feature Multi-Brand Control SetupUsing Multi-Brand Control Cable Box Brand Code Numbers TV Brand Code NumbersDSS Brand Code Numbers Important NotesIndex Search Tape OperationProgram End Search REW/SLOWAuto Play Auto Operation FunctionsAuto Rewind Commercial SkipStop Action Select SET Display CM/ZERO Counter Reset Press Counter ResetRepeat Play Zero SearchWeak Signal Display Feature VCR Lock FeatureAuto Shut-Off Feature To turn onRemote WARNING, Tape Position and Tape Status FeaturePress Tape Position To detect current tape positionPlaying Source VCR Recording Editing Deck Copying Your Tapes DubbingSubtitle Language DVD only Audio Soundtrack Language DVD onlyPress SUB Title Press Angle Multiple Angle Viewing DVD onlyOr Angle Vocal Selection for Karaoke Discs DVD/Video CDTitle Menu DVD only Disc OperationDVD Menu DVD only Press SET or Play to performProgram Repeat Play Video CD/CD Program Play Video CD/CDTo select Play Mode To select SET UP DVDRandom Play Video CD/CD To begin random playTo select the setting, and press SET DVD Operation using On-Screen DisplaysTo select an item, and press SET Example of DVDDisc information screen for DVD Detailed Descriptions of each On-Screen DisplayDisc information screen for Video CD/ CD Title NoDeck information screen Play mode Video CD/ CD only See p orFor your reference TRACK/DISC Repeat Play Video CD/CDDVD Lock DVD only Press Number keys to enter your secret codeUnlocked Disc Languages DVD only Settings for DVD OperationDisc Languages See below Audio Output See pAudio Output TV Mode Still ModePress Action twice to exit this mode ExampleCode Language Language Code ListIf Deck is not in Stop mode or a cassette If you attempt to set or review a TimerIf you press REC on the remote control or Remote control or Deck without a Cassette insertedPower Correction Remote Control CorrectionRecording & Playback Correction Miscellaneous Correction DVD/ Video CD/ CD CorrectionHollywood, FL Service in Puerto RicoLimited Warranty Como realizar la Configuració n Inicial Operaciones básicas para la grabació n Programació n fá cil para la grabació n con temporizadorOperaciones bá sicas del DVD Para volver a la pantalla normal Presione repetidamente Clear o DisplayEjemplo de DVD Ejemplo de Video CD Cambio del idioma de subtítulos DVD solamente Fijaciones inicialesSelecció n de Idiomas DEL Disco DVD solamente Seleccione AudioSelecció n de vocal para los discos de Karaoke DVD/Video CD Visió n desde otro á ngulo DVD solamenteAmpliació n de la imagen DVD solamente Presione o las teclas de nú merosS0401-0 Deck & VCR