Panasonic PV-D4761 Tape Operation, Index Search, Program End Search, Rew/Slow

Tape Operation

Search System

For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings.

Index Search

1 INDEX SEARCH

ENTER INDEX NUMBER :1

USING 1- 9 KEYS

FORWARD SEARCH :FF

REVERSE SEARCH :REW

NEXT :SEARCH

EXIT :STOP

Press SEARCH*

to display SEARCH in Stop or Play mode, and then

press NUMBER keys

to select recording number.

•To calculate number, see below.

Press FF/SLOW+ or REW/SLOW- to start search.

Program End Search

Locates end point of recording for continuity.

1 Press SEARCH twice

to display SEARCH in Stop or Play mode.

2 PROGRAM END SEARCH	Press FF/SLOW+
	to start
	PROGRAM
SEARCH START : FF	END SEARCH.
EXIT :SEARCH	• To cancel, press
	PLAY or STOP.

INDEX SEARCH Play begins at

Examples of Program End Search.

2	search end.
	To search forward
	or back 1 index,
FORWARD SEARCH : FF	press FF/SLOW+ or
REVERSE SEARCH : REW

REW/SLOW-

while screen left is displayed (10 sec.).

Fig. 1

Program 1

the current tape position Press SEARCH button

FF

Fig. 2

INDEX Program 2 or BLANK

End Point

• To cancel, press PLAY or STOP.

To Calculate Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

1 2 3 4 5 6 7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

1 2 3 4 5 6 7

NOTE: indicates start points of each recording.

	INDEX	Program 1	BLANK	INDEX	Program 2	BLANK
			the current tape position
			Press SEARCH button			End Point
				FF
Fig. 3		the current tape position
		Press SEARCH button
INDEX	Program 1		BLANK			Program 2

		Ifsearchexceeds
End Point	FF	afewsecondsin
		BLANKarea.

Upon locating end point,

-->search continues 7 sec. past end point, -->tape rewinds to 10 sec. before end point, -->tape plays to end point and stops.

Note Note

•If Index Search is started very close to

an index mark, that index mark may not be counted in the search.

•If Program End Search is started very close to an index mark, that mark may be skipped over.

34 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com