Pelco Dx8000 manual Remove the Drive Mount Baskets, Removing Hard Drive Basket

Page 14

REMOVE THE DRIVE MOUNT BASKETS

1.Remove hard drive mounting basket(s):

a.Using a Phillips-head screwdriver, unfasten the four screws that attach each drive basket to the chassis. Refer to Figure 10.

b.Gently lift the basket up and out with drive(s) attached. Be careful not to force the basket free or to disturb other components inside the unit.

Figure 10. Removing Hard Drive Basket

IMPORTANT: When upgrading your unit, it is recommended that you do not remove previously installed drives from the drive baskets. However, if you do remove a drive for any reason, be sure to note the arrangement of the drives within the drive basket and reinstall them in the same order they were before removal. It is critical that drives be returned to the DX8000 in their original order.

12	C1609M (6/04)

Image 14

Contents DX8000 Page Tools Needed Parts ListIntroduction Removing Power Cord from Wall Getting ReadyRemoving Power Cord from Unit ESD Protection Prepare Unit for Drive Installation Open the Unit ChassisRemoving Chassis Cover Component Layout DX8000 InteriorMove the Front and Rear Cross-Braces Removing Front and Rear Cross-Braces Placing Front and Rear Cross-Braces Out of the Way Disconnect the Data and Power Cables Removing IDE Data CablesRemoving Hard Drive Power Connections Remove the Drive Mount Baskets Removing Hard Drive BasketInstall Additional Drives Prepare the DrivesMount the Additional Drives Inserting Drives into BasketReplacing Drive Baskets SET the Master / Slave Jumpers Setting Drive Jumpers Install the DX8000-EXD IDE Extender Card Location of PCI SlotPCI Slot 6 Slot Cover Inserting the DX8000-EXD IDE Extender Card Securing the DX8000-EXD IDE Extender Card Reconnect Data and Power Cables Installing the CD-RW Data Cable to the Extender Card Installing Hard Drive Data Cables Installing Hard Drive Power Connectors Reassemble the Unit Replacing Front Cross-BraceReplacing Chassis Cover Restarting Unit Initialize the New Drives to Store Data Opening List of DrivesSelecting Allocation Option for Each Drive Format Warning Dialog Box C1609M 6/04 Product Warranty and Return Information ISO9001

Related manuals

Manual 32 pages 20.54 Kb

Manual 10 pages 26.21 Kb

Manual 40 pages 3.7 Kb

Manual 1 pages 21.57 Kb