Pelco Dx8000 manual Reconnect Data and Power Cables

Page 24

RECONNECT DATA AND POWER CABLES

IMPORTANT: Data and power connectors fit together only one way. All connectors are keyed to ensure that they are inserted in the proper orientation. Examine the drive, motherboard and cable connectors before installation so that connectors are properly aligned. Make sure connectors are seated in the mating connectors securely, but do not force the connection. When installing drive power cables, push the connectors straight in or out; do not rock connectors back and forth.

1.Connect the CD-RW drive to the system DX8000-EXD IDE extender card using the data cable that came with your DX8000:

a.Connect the black connector of the data cable that came with your DX8000 to the CD-RW drive as illustrated in Figure 20.

b.Connect the blue connector of the data cable to IDE connector labeled IDE1 on the DX8000-EXD extender card. This is the IDE connector that is closest to the front of the DVR. Refer to Figure 20.

22	C1609M (6/04)

Image 24

Contents DX8000 Page Parts List IntroductionTools Needed Removing Power Cord from Wall Getting ReadyRemoving Power Cord from Unit ESD Protection Prepare Unit for Drive Installation Open the Unit ChassisRemoving Chassis Cover Component Layout DX8000 InteriorMove the Front and Rear Cross-Braces Removing Front and Rear Cross-BracesPlacing Front and Rear Cross-Braces Out of the Way Disconnect the Data and Power Cables Removing IDE Data CablesRemoving Hard Drive Power Connections Remove the Drive Mount Baskets Removing Hard Drive BasketInstall Additional Drives Prepare the DrivesMount the Additional Drives Inserting Drives into BasketReplacing Drive Baskets SET the Master / Slave Jumpers Setting Drive Jumpers Install the DX8000-EXD IDE Extender Card Location of PCI Slot PCI Slot 6 Slot Cover Inserting the DX8000-EXD IDE Extender Card Securing the DX8000-EXD IDE Extender Card Reconnect Data and Power Cables Installing the CD-RW Data Cable to the Extender Card Installing Hard Drive Data Cables Installing Hard Drive Power Connectors Reassemble the Unit Replacing Front Cross-BraceReplacing Chassis Cover Restarting Unit Initialize the New Drives to Store Data Opening List of DrivesSelecting Allocation Option for Each Drive Format Warning Dialog Box C1609M 6/04 Product Warranty and Return Information ISO9001

Related manuals

Manual 32 pages 20.54 Kb

Manual 10 pages 26.21 Kb

Manual 40 pages 3.7 Kb

Manual 1 pages 21.57 Kb