Pelco DX4600 manual Activating Presets, Activating Patterns, Buttons

ACTIVATING PRESETS

1.On the front panel or remote control, press any of the arrow buttons to select a camera pane. Using the mouse, click a camera pane. A red border highlights the selected pane.

2.Press PTZ on the front panel or the remote control. Using the mouse, click the PTZ button . The PTZ control is displayed.

Figure 102. PTZ Operation

3.On the front panel or remote control, press the preset number, and then press SHIFT + PRESET. Using the mouse, click the number pad on the PTZ control, and then click PRESET. The camera moves to the preset location.

ACTIVATING PATTERNS

A pattern is a user-defined, viewable camera path with a specified beginning and end. Patterns are made up of a sequence of standard pan/tilt and lens commands. Patterns are stored in the internal memory of the PTZ device, such as a Spectra® dome, connected to the DX4500/DX4600. Spectra III™ supports one pattern and the Spectra III SE supports up to four unique PTZ patterns. Depending on the type and configuration of the PTZ device, the DX4500/DX4600 can address up to four unique PTZ patterns. Once defined, a pattern can be activated with a series of on-screen commands and will run continuously until it is deactivated.

To activate a pattern:

1.On the front panel or remote control, press any of the arrow buttons to select a camera pane. Using the mouse, click a camera pane.

2.On the front panel or on the remote control, press PTZ. Using the mouse, click the PTZ button . The PTZ control is displayed.

3.On the front panel or remote control, press the pattern number, and then press SHIFT + PATTERN. Using the mouse, click the number pad on the PTZ control, and then click PATTERN. The pattern runs.

4.To halt the pattern, on the front panel or remote control, press any of the arrow buttons . Using the mouse, click the move

buttons .

100 C2674M-C (7/09)