Pelco DX4600 manual Linking Menu Setup, Alarm Inputs

Page 52

Linking Menu Setup

The pre- and post-event recording settings for alarms and motion are configured in the Record menu. For information about pre- and post-event recording setup, refer to Schedule Menu Setup on page 37.

1.On the front panel or remote control, press the up/down arrow buttons to highlight the Linking menu option. Using the mouse, click the Linking menu option. The linking options are displayed.

Figure 46. Linking Menu

ALARM INPUTS

The DX4508/DX4608/DX4608 support eight alarm inputs and two relay output; and the DX4516/DX4616 supports sixteen alarm inputs and four relay outputs.

•One alarm input can be linked to one camera channel. One camera channel can be assigned to multiple alarm inputs.

•One alarm input can be linked to one relay output. One relay output can be assigned to multiple alarm inputs.

1.From the Linking menu, on the front panel or remote control, press ENTER. Using the mouse, click the Linking menu option. The Alarm option is highlighted and the settings are displayed.

Figure 47. Property Option Settings

52	C2674M-C (7/09)

Image 52

Contents DX4500/DX4600 Digital Video Recorder Contents Operation Appendix a List of Illustrations 111 124 List of Tables Models and Features Welcome to the DX4500/DX4600 Series DVRsFeature DX4508 DX4516 Remote Client Software ApplicationsDX4616 ModelSoftware Upgrades Upgrade PolicyHardware Upgrades Getting Acquainted Application WindowGUI Toolbar Stop Stops playback Forward Provides two modes Setup MenuStop Stops playback PTZ Control System Status Indicators Front PanelChannel and Camera Control Buttons Button 1 Only selects cameraPlayback Controls Shuttle Dial outer ringMonitor Selection On the GUI toolbar Zoom Zooms a camera in and outRemote Control PowerFunction as Login icon on the GUI toolbar Channel SelectionArrow Buttons Selects menu options Selection ControlsPTZ Controls Virtual Keyboard Turning On and Logging On to the DVR Click OK. The system logs you on and the Login icon Logging Off and Turning Off the DVR Setup Window Navigating the Setup WindowPane Front Panel/Remote Control Mouse Properties DisplaysCamera Menu Setup Camera MenuTo create a camera name, do the following PropertiesVideo Adjustment PTZ SetupTable C. Third-Party PTZ Compatibility Third-Party PTZ Device ProtocolLGSD168 Baxall BPD1-RAS916 Pelco PTo select a PTZ channel, do the following C2674M-C 7/09 Video Setup Recording SetupResolution DX4608/DX4616 Settings Video FormatC2674M-C 7/09 Alarm Record Setup MULTI-EVENT Recording SetupMotion Record Setup Instant Record Setup Schedule Menu Setup Schedule MenuDaily Recording Schedule Daily Recording ScheduleCopying Schedules Copying by DAY, WEEKDAY, or WeekendCopying Between Channels Selecting Destination Channels Holiday Schedules Creating a Holiday ScheduleSave the settings Do one of the following C2674M-C 7/09 Editing a Holiday Schedule Holiday List Dialog BoxHoliday Schedule Deleting a Holiday Schedule Select the Holiday optionSave the revised Holiday list Do one of the following Display Menu Setup Main and Spot MonitorsOSD Settings To select a language, do the following Save the changes Do one of the following Linking Menu Setup Alarm InputsChanging the Input Type Do one of the following To configure the relay output, perform the procedure in step Motion DetectionTo configure the motion area, do the following Define and Select a Motion View AreaRelay Outputs To clear a selected view area, do one of the followingC2674M-C 7/09 Network Menu Setup TCP/IPC2674M-C 7/09 Configuring Ddns DdnsDdns Virtual Keyboard Notification Setting Notification MailTo configure the Smtp server settings Test E-mail Message Save the changes Do one of the following Emergency Notification Enabling Emergency NotificationRepeat this procedure to configure additional IP addresses To configure a destination computer IP addressEnter the destination remote computer IP address System Menu Setup Date and TimeC2674M-C 7/09 Set the date format Configuring Daylight Saving DST Time ShiftTo save the changes Do one of the following NTP Verify that the DVR is synchronized with the NTP Sound Settings Enable sound for any of the properties SoundUser Accounts DVR Operation User LevelChanging the Administrator Default Password Repeat a to enter the remaining password charactersAdding a NEW User USB drive Software UpdateNetwork server DVR S/W Dialog Box Configuration IMPORTING, EXPORT, and Factory Default SettingsHard Disk To reset the DVR to factory defaultsOverwrite Formatting the System Drives Working with Hard DrivesBackup Device can be used for daily or weekly backupsGuideline Media Media can be formattedInstant Backup Selecting the Backup ScheduleC2674M-C 7/09 Weekly Backup Schedule Daily Backup Schedule Page Erasing and Formatting Media CD/DVD Writer Not Available Dialog BoxWould You Like to Erase a Media Dialog Box Viewing Backed UP Video System IR Remote ID and User Logout IR Remote IDAuto User Logout Recovering the Administrator Password Live Video About Basic System DefaultsLog on to the system Starting and Stopping Instant Record Instant Record and PlaybackInstant Playback PTZ in Live View Viewing Playback and Live Video SimultaneouslyWorking with PTZ Devices Using the KBD300A Keyboard Activating Patterns Activating PresetsButtons Sending Auxiliary Commands to a Device PTZ PresetsPTZ Patterns Verify that you can activate the presetStop programming the pattern Accessing Programming Features of a Remote Camera Clearing a Pattern104 C2674M-C 7/09 Acknowledging AN Alarm or Motion Event Copying and Exporting VideoCancel Cancels the change Main and Spot MonitorsMain Monitor Sequentially numbered starting from the main channelSpot Monitor Selecting the Main Video Output MonitorsDisplaying Video on the Analog Monitor Accept the changeDisplaying Video on the VGA Monitor LOG List System Log and InformationInformation Example System Information Playback Video Playback mode has the following conditionsPlayback View and Controls Playback Video Searching for Video Events Search MediaDATE/TIME Search To conduct a date and time searchC2674M-C 7/09 115 DST DATE/TIME Search Select Data Dialog Box To conduct a DST date and time searchTimeline Position in DST Time Period Event Search Change the month settingConduct an event search Event Search Results Bookmark Search Event Playback Video in PIP PaneExport Search Playback of Bookmarked VideoPlayback of Exported Video Pixel Search Pixel Search Calendar Select the channelSet the area Pixel Search ResultsBookmark Playback Bookmarking VideoViewing Bookmarked Video Clearing BookmarksExporting Video EnterDX4500/DX4600 Factory Defaults Schedule DisplayLinking NetworkSystem Table G. Factory Default Settings Sheet 4 Password Hidden Yes Update SelectionYes Backup Partition Selection Yes MethodTime Zone Standard Time Daylight Saving Summer Time Time Zone Conversion Chart+10 hours +11 hours Page Product Warranty and Return Information

Related manuals

Manual 40 pages 44.71 Kb