Pelco DX4600 manual Mail, Setting Notification

MAIL

The DX4500/DX4600 mail feature sends an e-mail notification to all designated users when an event is detected. (for example, an alarm or motion event is detected and the ADMINISTRATOR password is changed) This event must be specified using the notification option. For information about configuring the notification option, refer to Notification on page 62.

The mail feature is configured and operates independently of the emergency agent feature. For information about setting up the emergency notification feature, refer to Emergency Notification on page 66.

1.In the Setup window, on the front panel or remote control, press the up/down arrow buttons to select the Network menu option. Using the mouse, click the Network menu option. The Network page opens.

2.On the front panel or remote control, press ENTER, and then press the up/down arrow buttons to select Mail. Using the mouse, click Mail. The Mail properties are displayed. By default, notification is set to OFF.

Figure 62. Mail Option Properties

3.To enable mail notification:

a.On the front panel or remote control, press ENTER twice. Using the mouse, click the language settings box. The notification settings box changes color.

b.On the front panel or remote control, press the left/right arrow buttons. . Using the mouse, right- or left-click in the settings box to toggle the setting to ON. The SMTP server and mail address settings boxes are available.

Figure 63. Setting Notification

C2674M-C (7/09) 63