Pelco DX4600 manual Schedule, Display, Linking, Network

Table G. Factory Default Settings (Sheet 2 of 4)

Menu Command	Option	Property	Default Setting	Factory	Client
				Default	Application
	Instant Record	Resolution	352 X 240	Yes	Yes
		Quality	STANDARD	Yes	Yes
		Image rate	3	Yes	Yes
Schedule	Sun to Sat	1– 8 or 1–16	Alarm/Motion	Yes	Yes
	Holiday	1– 8 or 1–16	No record	Yes	Yes
Display	OSD	Language	ENGLISH	Yes	Yes
		Channel Name	ON	Yes	Yes
		Channel Status	ON	Yes	Yes
	Main Monitor	Dwell Time	2 SEC	Yes	Yes
	Spot Monitor	Dwell Time	2 SEC	Yes	Yes
		Event Popup	ALL	Yes	Yes
		Covert Camera	OFF	Yes	Yes
Linking	Alarm		1– 8 or 1–16	No
		Input Type	N.O.	Yes	Yes
		Camera	01– 08 or 01– 16	Yes	Yes
		Relay Output	01– 02 or 01– 04	Yes	Yes
	Motion	Channel	CH01	Yes
		Sensitivity	05	Yes	Yes
		Relay Output	NONE	Yes	Yes
		Area	All selected	Yes	Yes
	Output	Relay Off	ALARM ACKNOWLEDGE	Yes	Yes
Network	TCP/IP	DHCP	ON	Yes	No
		IP Address	Unavailable	Yes	No
		Subnet Mask	Unavailable	Yes	No
		Gateway	Unavailable	Yes	No
		Primary DNS	Unavailable	Yes	No
		Secondary DNS	Unavailable	Yes	No
		TCP/IP Port	9001	Yes	No
		Web Server Port	80	Yes	No
		Bandwidth Throttle	100 Mbps	Yes	Yes
	DDNS	User Name	Unavailable	Yes	No
		Password	Unavailable	Yes	No
	Notification	Alarm On	OFF	Yes	Yes
		Motion Detection	OFF	Yes	Yes
		Disk Full	OFF	Yes	Yes

128 C2674M-C (7/09)