Pelco DX4600 manual Video Adjustment, PTZ Setup

Page 29

VIDEO ADJUSTMENT

The video adjustment option allows you to set the characteristics (brightness, contrast, and color) of displayed video, and how it is recorded and stored for each camera.

1.From the options pane, on the front panel or remote control, press the up/down arrow buttons to highlight Video Adjustment. Using the mouse, click Video Adjustment. The Video Adjustment option is highlighted and the property settings are displayed.

Figure 15. Video Adjustment Option Settings

2.On the front panel or remote control, press ENTER. Using the mouse, click Channel. The Channel 01 name box is highlighted.

3.Use the front panel, remote control, or mouse to select a channel. Adjust the brightness, contrast, and color of the display on the monitor. Be sure to preview the video display in the preview window before finalizing your selection.

4.Repeat step 3 for each camera for which you want to adjust the video output display.

5.To reset the settings for the current channel using the front panel or remote control, press the up/down arrow buttons to highlight “Restore to Default”, and then press ENTER. Using the mouse, click Restore to Default. The setting for the current channels are reset to the factory defaults.

6. To accept the settings and exit Video Adjustment, press the MENU/ESC button on the front panel or press the MENU/ESC button

on

the remote control. Using the mouse, click Video Adjustment. The Video Adjustment option is highlighted.

 

PTZ SETUP

PTZ devices are connected to the DX4500/DX4600 using the DATA 1 and DATA 2 RS-422/RS-485 ports located on the back of the unit. The DX4508/DX4608 supports up to 8 serial PTZ cameras; the DX4516/DX4616 supports up to 16 serial PTZ cameras. Multiple PTZ cameras are connected by daisy-chaining the camera connections. The DX4500/DX4600 allows you to address and control multiple PTZ cameras individually.

NOTE: You might experience operational issues when a camera device is not correctly terminated. When connecting camera devices, use a normal load termination of 75 ohms. When looping through DVR inputs, ensure that the signal is terminated at the end device. For additional information about terminating a specific camera device, refer to the device’s installation manual.

Before you perform the PTZ setup procedure, you will need the following information for each PTZ camera being configured:

•Channel to which the PTZ camera is attached

•Data port to which the camera is connected

•Pelco D and Pelco P address

•Camera protocol

•Communication settings: Baud rate, parity, data bits, and stop bits

C2674M-C (7/09)

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DX4500/DX4600 Digital Video Recorder Contents Operation Appendix a List of Illustrations 111 124 List of Tables Welcome to the DX4500/DX4600 Series DVRs Models and FeaturesRemote Client Software Applications Feature DX4508 DX4516DX4616 ModelHardware Upgrades Upgrade PolicySoftware Upgrades Application Window Getting AcquaintedGUI Toolbar Stop Stops playback Setup MenuStop Stops playback Forward Provides two modes PTZ Control Front Panel System Status IndicatorsChannel and Camera Control Buttons Button 1 Only selects cameraShuttle Dial outer ring Playback ControlsOn the GUI toolbar Zoom Zooms a camera in and out Monitor SelectionPower Remote ControlFunction as Login icon on the GUI toolbar Channel SelectionPTZ Controls Selection ControlsArrow Buttons Selects menu options Virtual Keyboard Turning On and Logging On to the DVR Click OK. The system logs you on and the Login icon Logging Off and Turning Off the DVR Navigating the Setup Window Setup WindowProperties Displays Pane Front Panel/Remote Control MouseCamera Menu Camera Menu SetupProperties To create a camera name, do the followingPTZ Setup Video AdjustmentThird-Party PTZ Device Protocol Table C. Third-Party PTZ CompatibilityLGSD168 Baxall BPD1-RAS916 Pelco PTo select a PTZ channel, do the following C2674M-C 7/09 Recording Setup Video SetupResolution DX4608/DX4616 Settings Video FormatC2674M-C 7/09 Motion Record Setup MULTI-EVENT Recording SetupAlarm Record Setup Instant Record Setup Schedule Menu Schedule Menu SetupDaily Recording Schedule Daily Recording ScheduleCopying by DAY, WEEKDAY, or Weekend Copying SchedulesCopying Between Channels Selecting Destination Channels Creating a Holiday Schedule Holiday SchedulesSave the settings Do one of the following C2674M-C 7/09 Holiday List Dialog Box Editing a Holiday ScheduleHoliday Schedule Select the Holiday option Deleting a Holiday ScheduleSave the revised Holiday list Do one of the following Main and Spot Monitors Display Menu SetupOSD Settings To select a language, do the following Save the changes Do one of the following Alarm Inputs Linking Menu SetupChanging the Input Type Do one of the following Motion Detection To configure the relay output, perform the procedure in stepDefine and Select a Motion View Area To configure the motion area, do the followingTo clear a selected view area, do one of the following Relay OutputsC2674M-C 7/09 TCP/IP Network Menu SetupC2674M-C 7/09 Ddns Configuring DdnsDdns Virtual Keyboard Notification Mail Setting NotificationTo configure the Smtp server settings Test E-mail Message Save the changes Do one of the following Enabling Emergency Notification Emergency NotificationEnter the destination remote computer IP address To configure a destination computer IP addressRepeat this procedure to configure additional IP addresses Date and Time System Menu SetupC2674M-C 7/09 Set the date format DST Time Shift Configuring Daylight SavingTo save the changes Do one of the following NTP Verify that the DVR is synchronized with the NTP Sound Sound Settings Enable sound for any of the propertiesDVR Operation User Level User AccountsRepeat a to enter the remaining password characters Changing the Administrator Default PasswordAdding a NEW User Network server Software UpdateUSB drive DVR S/W Dialog Box IMPORTING, EXPORT, and Factory Default Settings ConfigurationOverwrite To reset the DVR to factory defaultsHard Disk Working with Hard Drives Formatting the System DrivesDevice can be used for daily or weekly backups BackupGuideline Media Media can be formattedSelecting the Backup Schedule Instant BackupC2674M-C 7/09 Weekly Backup Schedule Daily Backup Schedule Page CD/DVD Writer Not Available Dialog Box Erasing and Formatting MediaWould You Like to Erase a Media Dialog Box Viewing Backed UP Video IR Remote ID System IR Remote ID and User LogoutAuto User Logout Recovering the Administrator Password Log on to the system About Basic System DefaultsLive Video Instant Playback Instant Record and PlaybackStarting and Stopping Instant Record Viewing Playback and Live Video Simultaneously PTZ in Live ViewWorking with PTZ Devices Using the KBD300A Keyboard Buttons Activating PresetsActivating Patterns PTZ Presets Sending Auxiliary Commands to a DeviceStop programming the pattern Verify that you can activate the presetPTZ Patterns Clearing a Pattern Accessing Programming Features of a Remote Camera104 C2674M-C 7/09 Copying and Exporting Video Acknowledging AN Alarm or Motion EventMain and Spot Monitors Cancel Cancels the changeMain Monitor Sequentially numbered starting from the main channelSelecting the Main Video Output Monitors Spot MonitorDisplaying Video on the Analog Monitor Accept the changeDisplaying Video on the VGA Monitor Information System Log and InformationLOG List Example System Information Playback View and Controls Playback mode has the following conditionsPlayback Video Playback Video Search Media Searching for Video EventsTo conduct a date and time search DATE/TIME SearchC2674M-C 7/09 115 Select Data Dialog Box To conduct a DST date and time search DST DATE/TIME SearchTimeline Position in DST Time Period Conduct an event search Change the month settingEvent Search Event Search Results Event Playback Video in PIP Pane Bookmark SearchPlayback of Bookmarked Video Export SearchPlayback of Exported Video Pixel Search Calendar Select the channel Pixel SearchPixel Search Results Set the areaBookmarking Video Bookmark PlaybackViewing Bookmarked Video Clearing BookmarksEnter Exporting VideoDX4500/DX4600 Factory Defaults Display ScheduleLinking NetworkSystem Password Hidden Yes Update Selection Table G. Factory Default Settings Sheet 4Yes Backup Partition Selection Yes Method+10 hours +11 hours Time Zone Conversion ChartTime Zone Standard Time Daylight Saving Summer Time Page Product Warranty and Return Information
Related manuals
Manual 40 pages 44.71 Kb
Top Page Image Contents